Menu
Advanced Drainage Systems 6510100 6" x 100 Ft Single Wall Pipe
6510100
Warning: Last items in stock!
Availability date:
Item is normally in stock and ships out within 3-5 Business days (excluding transit time). If out of stock it can take up to 2-4 weeks (excluding transit time).Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.
The Single Wall corrugated HDPE pipe is ideal for drainage projects where flexibility, light weight and low cost are important. Homeowners find that this corrugated pipe is an economical, easy—to—install solution to common residential storm water drainage problems. These may include downspouts run off, foundation and window well drains, driveway culverts and wet spots on the lawn.
Heavy Duty singlewall pipe delivers superior value while providing physical strength and structural design that cannot be matched by metal or concrete. Heavy Duty pipe is lightweight, which allows for easier handling for faster, less costly installations.
This specification describes 3-through 24-inch (75 to 600 mm) single wall high density corrugated polyethylene neavy auty oipe for use in gravicy-now land drainage applications.
ADS single wall high density corrugated polyethylene highway pipe shall have annular interior and exterior corrugations. 3-through 24-inch (75 to 600 mm) pipe shall meet ASTM F667
Joints for 3- to 24-inch (75-600 mm) shall be made with split or snap couplings. Standard connection shall meet the soil-tightness requirements of AST F667. Gasketed connections shall incorporate a closed cell synthetic expanded rubber gasket meeting the requirements of ASTM D1056 Grade 2A2. Gaskets, when applicable, shall be installed by the pipe manufacturer.
Fittings shall conform to ASTM F667
Pipe and fittings shall be high-density polyethylene conforming with the minimum requirements of cell classification 323410C or 333410C as defined and described in the latest version of ASTM D3350.
Installation shall be in accordance with AST D2321 & ADS recommended installation guidelines, with the exception that minimum cover in trafficked areas for 3-through 24-inch (75 to 600 mm) diameters shall be one foot (0.3 m. Maximum till heights depend on embedment material and compaction level; please refer to Technical Note 2.03. Contact your local ADS representative or visit our website adspipe.com for a copy of the latest installation guidelines.