Reduced price! Adams Rite 7270 Fire-Rated Electric Strikes for Hollow Metal Door Jambs View larger

Adams Rite

Adams Rite 7270 Fire-Rated Electric Strikes for Hollow Metal Door Jambs

7270

Item normally ships out within 1-2 Weeks (excluding transit time). If out of stock it can take up to 3-4 weeks (excluding transit time). Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.

$304.20

40% Off

$507.00

Details: Adams Rite 7270 Fire-Rated Electric Strikes for Hollow Metal Door Jambs

Gain total control over the comings and goings of your facility. With the Adams Rite 7270 Fire-Rated Electric Strikes for Hollow Metal Door Jambs you control the latch's mechanism from a remote location. Fits a variety of door jambs and includes the UltraLine and Fire-Rated strikes.

7270 Fire-Rated Electric Strike with 4-7/8” faceplate is designed for mortise or cylindrical locksets with up to 3/4” latchbolt projection without a deadbolt. For use in hollow metal door jambs.

Remote electrical control of any door equipped with a mortise or cylindrical type lockset with up to 3/4” latchbolt projection, without a deadbolt. Electrical actuation unlocks strike jaw, releasing latchbolt so door can be opened without operating latch itself. Extremely compact mechanism fits into jamb sections as shallow as 1-7/8”. Fire-rated in fail-secure mode.

Specifications

UL10C, CAN/ULC-S104
Fire rated 3 hr.
Case
Approximately 1” x 3-3/8” x 1-7/8” deep.
Strike Lip
Basic 7270 strike has lip of proper length for 1-3/4” thick door that closes flush with jamb edge.
Strike Opening
3/4” x 1-7/16” x 5/8” deep. Bolt retainer jaw and strike lip are stainless steel. Strike accepts bolt from a variety of latchsets or mortise panic exit devices when it is centered on strike.
Faceplate
Measures 1-1/4” x 4-7/8”. Faceplate is flat, with square corners.
Voltage
Available in 12 or 24 volt AC and DC. DC continuous units are silent, AC intermittent units “buzz" on operation.

Current Draw/Amps

VoltsAC IntermittentDC Continuous
121.420.33
240.740.17
Options
Available with two monitoring signal switches which sense whether latch bolt is in strike and whether strike jaw is blocked. Choice of voltage in AC and DC for intermittent or continuous duty. Assembled for fail-secure (locked when unpowered) operation.
4603 Rectifier
Converts AC to DC, installs in low voltage line between transformer and strike. Rated 2 amps (200 PIV)
4605 Transformer
Converts 120VAC to 12/24 VAC. Rated 40 Volt-amp output assures plenty of power for strike release. Patented mounting bracket fits in knockout hole of standard junction boxes.
4606 Transformer
Plug-in version for standard wall outlet.

Standard Package

Individually boxed with mounting screws. Includes mounting clips and adhesive shims for use where welded tabs are omitted.

About Adams Rite

Adams Rite designs, manufactures and markets door hardware products to the industrial, commercial, and institutional building construction industry. Carrying an extensive line of products including locks, latches, electric strikes, exit devices and integrated door assemblies, Adam's Rite has been providing security products to the United States and beyond for over 100 years. Standing by their tradition of developing new and innovative products, Adam's Rite builds their hardware to function well and to look good doing it, designing their products to complement the modern business aesthetic while meeting safety and access codes.

Specifications & Options

Strike Type
Mortise, Cylindrical
Security
Fail Secure
Voltage
12VDC, 24VDC
Duty
Heavy Duty (Grade 1)
Door Frame
Hollow Metal
Monitoring
Latchbolt
Position
Centerline
Bolt Throw / Projection
3/4"
Rating
Fire-Rated

Available Model Numbers and Combinations

Model/SKUAttributes
7270-549-630-50 24V, AC Intermittent, Monitor/Fail-Secure, Stainless Steel Satin, 1-3/8"
7270-319-6300 12V, DC Continuous or Intermittent, Monitor/Fail-Secure, Stainless Steel Satin, 1-1/16" or less
7270-340-6300 12V, AC Intermittent, Fail-Secure, Stainless Steel Satin, 1-1/16" or less
7270-349-6300 12V, AC Intermittent, Monitor/Fail-Secure, Stainless Steel Satin, 1-1/16" or less
7270-510-6300 24V, DC Continuous or Intermittent, Fail-Secure, Stainless Steel Satin, 1-1/16" or less
7270-519-6300 24V, DC Continuous or Intermittent, Monitor/Fail-Secure, Stainless Steel Satin, 1-1/16" or less
7270-540-6300 24V, AC Intermittent, Fail-Secure, Stainless Steel Satin, 1-1/16" or less
7270-549-6300 24V, AC Intermittent, Monitor/Fail-Secure, Stainless Steel Satin, 1-1/16" or less
7270-310-630-50 12V, DC Continuous or Intermittent, Fail-Secure, Stainless Steel Satin, 1-3/8"
7270-319-630-50 12V, DC Continuous or Intermittent, Monitor/Fail-Secure, Stainless Steel Satin, 1-3/8"
7270-340-630-50 12V, AC Intermittent, Fail-Secure, Stainless Steel Satin, 1-3/8"
7270-349-630-50 12V, AC Intermittent, Monitor/Fail-Secure, Stainless Steel Satin, 1-3/8"
7270-510-630-50 24V, DC Continuous or Intermittent, Fail-Secure, Stainless Steel Satin, 1-3/8"
7270-310-6300 12V, DC Continuous or Intermittent, Fail-Secure, Stainless Steel Satin, 1-1/16" or less
7270-519-630-50 24V, DC Continuous or Intermittent, Monitor/Fail-Secure, Stainless Steel Satin, 1-3/8"

View All Model Numbers and Options

Reviews

Write a review

Adams Rite 7270 Fire-Rated Electric Strikes for Hollow Metal Door Jambs

Adams Rite 7270 Fire-Rated Electric Strikes for Hollow Metal Door Jambs

More products from this category