AJW U704 Series Fixed Tilt Angle Frame Mirror

Item normally ships out within 2-4 Weeks (excluding transit time). Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.

This product is currently not available for sale, please contact us for more information.

$106.94

Details: AJW U704 Series Fixed Tilt Angle Frame Mirror

Features

  • Fabricated of #18 gauge stainless steel with #4 satin finish
  • Frame extends 4" at the top and tapers to 1" at bottom
  • Multiple reflective surfaces available
  • Mirror comes with a 15 year warranty against silver spoilage

Specifications

Frame
Fabricated of #18 ga stainless steel, #4 satin finish. Stainless steel frame is fabricated with welded mitered corners that are ground and polished smooth. Mirror extends out 4" at top and tapers to 1" at bottom
Mirror
1/4" thick type 1 transparent flat type, class 1 clear glass mirrors. Mirror is coated with silver and sealed with a uniform electrolytic copper plating, along with two coats of paint for added protection. Mirrors are guaranteed against silver spoilage for a period of 15 years. Mirrors conform to ASTM C1036 and ASTM C1503 R8
Filler
3/16" thick full size, shock absorbing, water resistant, non-abrasive polyethylene padding protects all concealed mirror surfaces
Brackets
Mounting brackets are fabricated of #20 ga pre-plated, galvanized steel. Lower bracket has two (2) side mounting points that allow frame to be secured to bracket
Standard Sizes Available (W × H)
16"x24", 16"x30", 18"x24", 18"x30", 18"x36", 24"x30", 24"x36"

Installation Instruction

Coordinate installation with architect / contractor for specific mounting location and height for each mirror application. Check all state an local codes for installation requirements. Remove hanger brackets and transfer mounting points to wall surface. Secure with proper fasteners for each application. Slide mirror frame over brackets and secure in place. Secure frame to bracket. Fillers are available if mirrors are mounted above and below tile line. (U004 Filler) Filler material will match mirror frame to form a one piece construction.

To meet ADA Code, bottom edge of reflective surface can be no higher than 40" above finished floor. (4.19.6) Full length mirrors may be used for universal application when installed in correct locations.

Abrasive cleaners & chloric solutions should not be used on mirrors. Discoloring or scratching may occur on frame and reflective surface.

Downloads

Reviews

Write a review

AJW U704 Series Fixed Tilt Angle Frame Mirror

AJW U704 Series Fixed Tilt Angle Frame Mirror

More products from this category