Reduced price! Best 45HM IDH MAX™ Mortise Lock View larger

Best Access

Best 45HM IDH MAX Mortise Lock

45HM

Cylinder Not Included

Item normally ships out within 2-4 Weeks (excluding transit time). Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.

$1,382.40

40% Off

$2,304.00

Details: Best 45HM IDH MAX Mortise Lock

DESCRIPTION

The IDH MAX offers convenience and efficiency for your electrified lock applications. Instead of separately installing reader devices, electrified strikes, door contacts and request-to-exit devices, you can now install just the IDH MAX in cylindrical or mortise lock applications. With IDH MAX, all of the formerly separate equipment needed to control access are self-contained in a single installation, drastically reducing the complexity of multiple wire runs.

Specifications (mechanical):

Case
Heavy wrought steel, 5 7⁄8" H × 4 1⁄4" D × 1" W steel parts are zinc dichromate plated for corrosion protection
Faceplate
Brass or bronze, 8" H × 1 1⁄4" W × 1/16" T . Lock face automatically adjusts to proper bevel during installation
Strike
Brass, bronze or stainless steel base material, 4 7⁄8" H × 1 1⁄4" W × 3⁄32" T. Fits standard door frame cut out as specified in ANSI A115.1. Universal (non-handed) strike supplied standard with lock
Backset
2 3/4"
Door thickness
For doors 1 3⁄4" — 3" thick. (specify thickness when ordering)
Installation
Lock requires modified door prep to mount the trim. Faceplate dimensions fit standard door preparation as specified in ANSI A115.1,. Lockset is easily reversible to match door handing without opening the mortise case
Latchbolt
Solid stainless steel, 3/4" throw. Latch is oil-impregnated for anti-friction operation. Reversible without opening case
Deadbolt
Solid stainless steel, 1" throw
Auxiliary bolt
Stainless steel, non-handed
Escutcheons
10 1/2" H × 3 5/16" W × 1" D (1" at the top, sloping down to 3/4" at the bottom)
Knobs
Diameter
Lever handle
Brass, bronze or stainless steel. (Lever #3, #14 and #15 conform to California Titles 19 and 24.)
Mounting
Knob and lever attached with hardened set screw on inside knob or inside lever

Specifications (electronic):

Maximum current draw
1.1 Amp for 50 milliseconds
Typical current draw (hold condition)
650 milliAmps Voltage
Magnetic Stripe Card Reader
Read Rate — 5 inches per second to 50 inches per second
Card Thickness
ISO standard .030" ± .003 thick. Compliance to FCC, Canadian, and European EMC requirements; for interference FCC Class A digital apparatus
Proximity Reader
ANSI/BHMA A156.25 compliant. Compatible with Motorola / Indala and HID proximity cards. ABA and Wiegand output. Weatherproof bezel and gasket provide protection for outdoor use. (Usable in most environmental/exterior applications)
Card Read Range
0 — 3 inches. Compliance to US FCC, Canadian FCC, and European EMC requirements
ESD Protection
15 Kilo Volt

Reviews

Write a review

Best 45HM IDH MAX Mortise Lock

Best 45HM IDH MAX Mortise Lock

More products from this category