Reduced price! Cendrex PFI Fire Rated Insulated Access Door

View larger

Cendrex PFI Fire Rated Insulated Access Door

Model: PFI

Note

For Stainless Steel finish Call us for the price sales@americanbuildersoutlet.com or Call us for Pricing (215) 279-8511

Write a review

Item normally ships out within 1-2 Weeks (excluding transit time). If out of stock it can take up to 3-4 weeks (excluding transit time). Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.

Details: Cendrex PFI Fire Rated Insulated Access Door

The fire rated insulated access door can be installed on fire rated walls and ceilings.

Features

Installation#Walls and ceilings.
Hinge#Piano hinge.
Flange#Exposed flange.
Size#Other sizes available upon request.

Specifications

Material: 20-gauge galvanneal steel door and 16-gauge cold rolled steel frame
Hinge: Continuous piano hinge. Hinge location: Hinges must be located on the second dimension (height).
Flange: 1" exposed flange
Frame: 21/2 " in depth, made of cold rolled steel
Rough opening: Door sizes + 1/4" or + 6mm
Insulation: 2" thick fire rated mineral wool
Inside panel release: Mechanisms to allow panels to open from inside, standard on all doors over 12" X 12 inches.
Finish: High quality white powder coat primer.
Packaging: Individually wrapped, 1 door per box.
Vertical Certification: UL 10B (2009), NFPA 252 (2012), CAN/ULC S104 (R1985), CAN/ULC S104 (2010).
Rating Achieved: 3 hours, neutral/negative pressure
Maximum size: 48" x 48" (1219mm x 1219mm), maximum area of 2304 in, tolerance on height and width limitation is more or less 3" (76mm) as long as the area does not exceed 2304 in.
Temperature rise: 250F (121C) after 30 minutes and 450F (232C) after 60 minutes.
Horizontal Certification: ASTM E119 (2012), CAN/ULC S101 (2007)
Rating Achieved: 3 hours in non-combustible construction and 1 hour in combustible construction
Maximum size: 24"X36" (610 mm X 914 mm) (hinges and latches on the side of 36"), tolerance on dimension limitations are more or less 3" (76 mm) as long as the area does not exceed 864 in.
Temperature rise: Within allowable per ASTM E119 and CAN/ULC S101

Applications

Public Buildings & Facilities
Commercial & Industrial Buildings
Government & Military Facilities
Retail & Strip Malls
Multifamily & Mixed-Use

Downloads