AJW US130-A Exposed Flange, 1.5" Diameter Security Grab Bar - Configuration A View larger

A&J Washroom

AJW US130-A Exposed Flange, 1.5" Diameter Security Grab Bar - Configuration A

Item normally ships out within 2-4 Weeks (excluding transit time). Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.

This product is currently not available for sale, please contact us for more information.

$71.24

Details: AJW US130-A Exposed Flange, 1.5" Diameter Security Grab Bar - Configuration A

Tubing

Fabricated of type 304 #18 ga stainless steel with a #4 satin finish and 1½" outside diameter. All bends are formed by an automatic mandrel bending process. All bars maintain a constant 1½" offset.

Flanges

Flanges are fabricated of 3" diameter, type 304 #11 ga stainless steel with #4 satin finish to match tubing. Flanges are heliarc welded to bar to form a one piece construction. Each flange has three (3) mounting points (1/4" dia.)

Closure Plate

Fabricated of #11 gauge stainless steel welded to the underside of the bar.

Strength

Bars that provide a 1 ""offset can support loads in excess of 900 lbs when properly installed. Other configurations can support loads excess of 250 lbs when properly installed. Grab bars must be installed properly to support the loads intended.

*When measuring and ordering grab bars, remember bars are sized centerline to centerline.

*Grab Bars comply with ADA Code 4.26.2

*Non-chloric and non-abrasive cleaners should be used to clean surface of bars and flanges.

Available Model Numbers and Combinations

Model/SKUAttributes
US130-A18 18"
US130-A24 24"
US130-A30 30"
US130-A36 36"
US130-A42 42"
US130-A48 48"

Reviews

Write a review

AJW US130-A Exposed Flange, 1.5" Diameter Security Grab Bar - Configuration A

AJW US130-A Exposed Flange, 1.5" Diameter Security Grab Bar - Configuration A

More products from this category