List of Model/SKU Numbers for the Pemko S773D Silicone Triple Fin Acoustic / Smoke Gasket
Here is a list of the Model/SKU Numbers and their corresponding attribute combinations associated with the Model.
Model #/SKU | Option Combination | MSRP | Price | |
---|---|---|---|---|
S773BL17 |
Finish:Flat Black, Length:17' |
$69.79 | ||
S773BL18 |
Finish:Flat Black, Length:18' |
$73.90 | ||
S773BL20 |
Finish:Flat Black, Length:20' |
$82.11 | ||
S773BL21 |
Finish:Flat Black, Length:21' |
$86.22 | ||
S773BL25 |
Finish:Flat Black, Length:25' |
$102.64 | ||
S773BL30 |
Finish:Flat Black, Length:30' |
$123.17 | ||
S773BL250 |
Finish:Flat Black, Length:250' |
$1017.32 | ||
S773D17 |
Finish:Dark Brown, Length:17' |
$69.79 | ||
S773D18 |
Finish:Dark Brown, Length:18' |
$73.90 | ||
S773D20 |
Finish:Dark Brown, Length:20' |
$82.11 | ||
S773D21 |
Finish:Dark Brown, Length:21' |
$86.22 | ||
S773D25 |
Finish:Dark Brown, Length:25' |
$102.64 | ||
S773D30 |
Finish:Dark Brown, Length:30' |
$123.17 | ||
S773D250 |
Finish:Dark Brown, Length:250' |
$1017.32 | ||
S773GR17 |
Finish:Gray, Length:17' |
$70.82 | ||
S773GR18 |
Finish:Gray, Length:18' |
$74.99 | ||
S773GR20 |
Finish:Gray, Length:20' |
$83.32 | ||
S773GR21 |
Finish:Gray, Length:21' |
$87.49 | ||
S773GR25 |
Finish:Gray, Length:25' |
$104.15 | ||
S773GR30 |
Finish:Gray, Length:30' |
$124.98 | ||
S773GR250 |
Finish:Gray, Length:250' |
$1035.44 | ||
S773W17 |
Finish:White, Length:17' |
$69.79 | ||
S773W18 |
Finish:White, Length:18' |
$73.90 | ||
S773W20 |
Finish:White, Length:20' |
$82.11 | ||
S773W21 |
Finish:White, Length:21' |
$86.22 | ||
S773W25 |
Finish:White, Length:25' |
$102.64 | ||
S773W30 |
Finish:White, Length:30' |
$123.17 | ||
S773W250 |
Finish:White, Length:250' |
$1017.32 | ||
S773BL510 |
Finish:Flat Black, Length:500' |
$2075.34 | ||
S773D510 |
Finish:Dark Brown, Length:500' |
$2075.34 | ||
S773GR510 |
Finish:Gray, Length:500' |
$2112.29 | ||
S773W510 |
Finish:White, Length:500' |
$2075.34 |
Silicone
- S773 adhesive perimeter seal is extruded from high-temperature silicone; effective between -58 degrees (F) and 450
- degrees (F).
- Triple-fin gasketing design effectively blocks light and sound from infiltrating a room.
- Tested and approved under UL 10C for fire; UL 1784 for smoke and ASTM E90 and BS EN ISO 140-3 for sound control.
- Air infiltration tested in accordance with ASTM E-283-91. Air infiltration is only .09 CFM/ft. of crack.
- During sound attenuation testing of the S773 adhesive perimeter seal in conjunction with Pemko automatic door bottom
- (411_PKL) and Pemko acoustic corner pad (ACP112), the door assembly achieved a 98 percent efficiency rating.
- Available in 17, 18, 20, 21 and 25 ft. coils.
- Category H - Gasketing - Smoke and draft control for positive pressure openings. Recommended products are PK33, PK55,
- S44, S88 and S773.
- Category H gaskets for use with listed steel frames and/or classified steel covered composite, hollow metal doors
- rated up to and including 3 hours; wood and plastic covered composite doors rated up to and including 1-1/2 hours; and
- wood core doors rated for 20 minutes without hose stream. When applied to the door and frame assembly in accordance
- with the manufacturers installation instruction, the assembly will comply with UBC 7-2 (1997) part II.
- Category J - Doors - gasketing that has been tested on a positive pressure fire door and frame but is not required for
- the door to obtain its fire door rating. Category J gasketing does not negatively affect the rating on a positive
- pressure door.
- Category J gaskets for use with listed steel frames and/or classified steel covered composite, hollow metal doors
- rated up to and including 3 hours; wood and plastic covered composite doors rated up to and including 1-1/2 hours; and
- wood core doors rated for 20 minutes.
- Category G - Edge-Sealing Systems - systems that are surface applied to frames or doors and required for Category B
- doors. S773 meets Category G requirements for 3' × 8' listed wood core fire doors installed in steel door frames,
- rated 20 minutes.
- Storage and shelf life: All adhesive gaskets have a limited shelf life. This product must be used within 6 months of
- purchase and must be stored between 50 degrees (F) and 100 degrees (F). For further notes/details, please see Adhesive
- Gasketing section.
Ratings
- Air Infiltration Tested
- Intertek Testing (Warnock Hersey)
- Sound Tested - ASTM E90
- BHMA Certified
- Smoke Tested - UL1784
- Fire Rated - UL10C - Positive Pressure
- Underwriters Laboratory 4L10
- GREENGUARD Gold Certified
Finishes
- S773BL: BL - Black Silicone
- S773D: D - Dark Brown Silicone
- S773GR: GR - Gray Silicone
- S773W: W - White Silicone