View larger

MS Sedco EDGE1 Active infrared sensor

Model: EDGE1

Write a review

Details: MS Sedco EDGE1 Active infrared sensor

The OPTEX OA-EDGE1 / OA-EDGE2 has been developed to increase the safety level of automatic swing doors. The OA-EDGE is based on OPTEX Active Infrared triangulation technology. Due to its modular design, you can upgrade the safety level of the sensor by adding additional modules.

Features

Easy Installation
The sensor is easy to install by simply clicking the master and slave modules into the profile. The master and slave modules are connected by a communication cable with connector. An alternative power supply connector on the master module makes installation quicker and more flexible.
Slim Design
The sensor has a very slim design to ensure it will fit on many different types of swing doors. The sensor is available in a silver or black profile complete with a black lens.
Safety
The wide detection area of each module ensures a high level of safety around the door and will prevent the door leaf from hitting an object or person near the door.
Module
The sensor can be assembled using master and slave modules according to the required safety level and the width of the swing door. For a standard configuration of 1 sensor, one master module is required. Depending on the door width, a maximum of 3 slave modules can be connected to this master module.
Quick Adjustment
Adjustments to the sensor are made using dipswitches and a levelling screw. Once the sensor is set up, an easy push on the function switch will launch the initialization and learning cycle. After installation, the sensor status can easily be checked on the visible LED.

Specifications

Mounting height: 1.5 to 3.0m (4'11'' to 9'10'')
Detection area: See Detection area
Detection method: Triangulation
Min. configuration: 1 master module +1 LED module
Max. configuration: 4 sensor modules +2 LED modules
Depth angle adjustment: 0 to +25
Power supply: 12 to 24VAC 10% (50 / 60Hz) 12 to 30VDC 10%
Power consumption: < 1.3W (< 2VA at AC) at Min. configuration < 3.5W (< 4.5VA at AC) at Max. configuration
Test input: Opto coupler 5 to 30VDC
Current 6mA Max.
Safety output 1, 2(*2): Form C relay
Voltage: 42VDC
Current: 0.3A Max. (Resistance load)
Output hold time: Approx. 0.5sec.
Response time: < 75msec.
Operating temperature: -20C to +55C (-4F to 131F)
Operating humidity: < 80%
IP rate: IP54

Applications

Public Buildings & Facilities
Commercial & Industrial Buildings
Government & Military Facilities
Retail & Strip Malls
Multifamily & Mixed-Use

Downloads