Reduced price!

View larger

NGP D608 Nylon Brush Seal Door Bottom Sweep

Model: D608

Write a review

Item normally ships out within 2-4 Weeks (excluding transit time). Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.

Details: NGP D608 Nylon Brush Seal Door Bottom Sweep

Features

Aluminum alloy 6063, T5 temper
Synthetic polymer: Polyamide
Excellent abrasion resistance, flexibility and memory
Moisture resistant
Retains insecticides well
Temperature range -70°F to 425°F
Door Sweep application is Category H Smoke & Draft Control
REACH and RoHS compliant
Not effective against water penetration
#6 × 3/4" stainless steel sheet metal screws furnished
Screw holes slotted for adjustment
Nylon brush is gray
Anodized aluminum

Options

FATT - Fast Attach Tape

Standards

CERTIFIED by UL to CAN/ULC-S104 and ANSI/UL10B, complies with NFPA 80 and NFPA 252 for application to Hollow Metal fire doors rated up to 3 Hrs., and Wood fire doors rated up to 90 minutes.
POSITIVE PRESSURE - CERTIFIED by UL to ANSI/UL10C, complies with IBC, NFPA 80 and NFPA 252 for application to Hollow Metal fire doors rated up to 3 Hrs., and Wood fire doors rated up to 90 minutes.
SMOKE & DRAFT CONTROL GASKETING. Certified by UL to ANSI/UL10C and ANSI/UL1784 Category 'H'; complies with IBC and NFPA 105 for use on 'S' labeled Positive Pressure Hollow Metal fire doors rated up to 3 hours, and Wood fire doors rated up to 90 minutes.

Downloads

National Guard Products Warranty

NGP LEED Recycled Content Percentage Chart

	Post-Consumer Recycled %	Pre-Consumer Recycled %
Aluminum Thresholds, Rain Drip Guards	18%	49%
Architectural Bronze Thresholds, Rain Drip Guards	70%	25%
Stainless Steel Thresholds, Rain Drip Guards	25%	3%
Rubber Ramps	0%	0%
Gasketing with Aluminum Retainers	13%	37%
Gasketing with Bronze Retainers	52%	19%
Gasketing with Stainless Steel Retainers	19%	2%
Self-Adhesive Gasketing	0%	0%
Finger Guard 2248	13%	37%
Finger Guard 2252	0%	0%
Metal Edge/Astragal sets (Steel)	25%	3%
Lite Kits & Louvers (Steel)	15%	5%
Aluminum Lite Kits & Louvers	18%	49%
Stainless Steel Lite Kits	25%	3%
Continuous Geared Aluminum Hinges	18%	49%
Stainless Steel Continuous Hinges	25%	3%

Available Model Numbers and Combinations

Model/SKU	Attributes
D608A-12	Anodized Aluminum
D608A-24	Anodized Aluminum
D608A-36	Anodized Aluminum
D608A-48	Anodized Aluminum
D608A-60	Anodized Aluminum,
D608A-72	Anodized Aluminum
D608A-84	Anodized Aluminum
D608A-96	Anodized Aluminum
D608A-108	Anodized Aluminum,
D608B-12	Brass (Gold)
D608B-24	Brass (Gold)
D608B-36	Brass (Gold)
D608B-48	Brass (Gold)
D608B-60	Brass (Gold)
D608B-72	Brass (Gold)