View larger

Pemko TYPE13 Floor Closer Threshold / Cover Plate Assembly

Model: TYPE 13-

Order $500 worth of Pemko Products and get 30% OFF!

Write a review

Item is normally shipped within 2-3 weeks from manufacturer. Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.

Details: Pemko TYPE13 Floor Closer Threshold / Cover Plate Assembly

Floor Closer Threshold/Cover Plate Assemblies

Floor Closer Covers are thresholds used to cover floor closers. They must be properly fabricated to allow for the proper operation of the floor closer. No merchandise made for special order will be accepted for return or credit. When ordering, please provide the following information.

TYPE OF ASSEMBLY: Type 11 or Type 14 for center hung, Type 13 or 15 for offset hung.
CLOSER TO BE USED: Manufacturer and model number.
NET LENGTH: Jamb-to-Jamb. Assembly Type 11, 13 and 14 are cut with center hung section 1/2" over net length up to 48" and 1" over net length over 48" to allow for fitting on the job. Please be specify "net length", if required. Assembly Type 15 is cut net length because of factory-cut miters.
HANDING: For single doors, specify right or left hand. For pairs of doors, handing is not required.
SPECIAL FINISHES: Examples include polished, oxidized and oil rubbed, Satin Buff, and PemKote.
SPECIAL FASTENERS: (For center section only) Example include: MS and ES, FHLS25 and SS/MS&ES.
SPECIAL FABRICATION INSTRUCTIONS - Notching, full miters, etc. Assembly Type 11 is supplied without mitered ends and assembly Type 13, 14 and 15 are supplied with both ends mitered. Also, when stop strips (shown on page 21), specify door thickness and pivot offset so that the threshold assembly width and pivot dimension can be determined.

Ratings

Barrier-Free
Fire Rated - UL10C - Positive Pressure

Size for Threshold Table

Type	Size	Threshold	Material
13	1/2 × 7	176A	Aluminum
13	1/2 × 7	176B	Brass (Bronze)
13	1/2 × 7	176D	Dark Bronze Anodized Aluminum
13	1/4 × 7	276A	Aluminum
13	1/4 × 7	276B	Brass (Bronze)
13	1/4 × 7	276D	Dark Bronze Anodized Aluminum
13	1/2 × 8	2548A	Aluminum
13	1/2 × 8	254X4B	Brass (Bronze)
13	1/2 × 8	2548D	Dark Bronze Anodized Aluminum
13	1/4 × 8	2748A	Aluminum
13	1/4 × 8	274X4B	Brass (Bronze)
13	1/4 × 8	2748D	Dark Bronze Anodized Aluminum
13	1/4 × 9	2749A	Aluminum
13	1/4 × 9	2749D	Dark Bronze Anodized Aluminum
13	1/4 × 10	2750A	Aluminum
13	1/4 × 10	2750D	Dark Bronze Anodized Aluminum
13	1/2 × 8-3/4	193Ax2/195A	Aluminum
13	1/2 × 8-3/4	193Bx2/195B	Brass (Bronze)
13	1/2 × 8-3/4	193Dx2/195D	Dark Bronze Anodized Aluminum
13	1/2 × 9	2549A	Aluminum
13	1/2 × 9	2549D	Dark Bronze Anodized Aluminum
13	1/2 × 10	2550A	Aluminum
13	1/2 × 10	2550D	Dark Bronze Anodized Aluminum
13	3/4 × 16 × 1/2	R.5OSMRA	Aluminum
13	1 × 19 × 3/4	R.75OSMRA	Aluminum
13	1-1/4 × 22 × 1	R1OSMRA	Aluminum

Documentation

Catalog (PDF)

Pemko Warranty

Available Model Numbers and Combinations

Model/SKU	Attributes
TYPE 13-176A 36	1/2" x 7", Single Door 36", A - Aluminum
TYPE 13-176B 36	1/2" x 7", Single Door 36", B - Brass (Bronze)
TYPE 13-176D 36	D - Dark Bronze Anodized Aluminum, 1/2" x 7", Single Door 36"
TYPE 13-176A 72	1/2" x 7", A - Aluminum, Double Door 72"
TYPE 13-176B 72	1/2" x 7", B - Brass (Bronze), Double Door 72"
TYPE 13-176D 72	D - Dark Bronze Anodized Aluminum, 1/2" x 7", Double Door 72"
TYPE 13-276A 36	1/4" x 7", Single Door 36", A - Aluminum
TYPE 13-276B 36	1/4" x 7", Single Door 36", B - Brass (Bronze)
TYPE 13-276D 36	D - Dark Bronze Anodized Aluminum, 1/4" x 7", Single Door 36"
TYPE 13-276A 72	1/4" x 7", A - Aluminum, Double Door 72"
TYPE 13-276B 72	1/4" x 7", B - Brass (Bronze), Double Door 72"
TYPE 13-276D 72	D - Dark Bronze Anodized Aluminum, 1/4" x 7", Double Door 72"
TYPE 13-2548A 36	1/2" x 8", Single Door 36", A - Aluminum
TYPE 13-254X4B 36	1/2" x 8", Single Door 36", B - Brass (Bronze)
TYPE 13-2548D 36	D - Dark Bronze Anodized Aluminum, 1/2" x 8", Single Door 36"