Details: Poly-Hangers LEAK DIVERTER KIT for Temporary Protection Systems

Divert roof and other leaks to an out of the way location to avoid creating dangerous wet floor conditions and to avoid disrupting customers and business operations.

The Kit contains the materials necessary to build and install up to 3 leak diverters (at the same time), which can vary in size from 2" × 4", up to 8" × 10" or larger, and have flexibility to be configured to fit your leak situation.

Our patented components allow these leak diverters to be installed in about 10 minutes. The components are reusable and the only component you will need to replace at times is the poly sheeting which you can get at a local hardware store.

Leaks below grid ceilings (Instructions):

Attach Poly Hanger 3 to grid at perimeter of leak area.

Cut poly sheeting to size. At center of poly, make a pilot hole through the poly using the tool provided in the kit. Push the special nylon drain fitting through the pilot hole and secure with the nylon nut.

Attach the poly sheeting to the Poly Hangers on the grid.

Attach the vinyl drain tubing to the drain fitting and run the tubing to a remote location.

Leaks above ceilings (Instructions):

Follow same steps as listed above except use Poly Hanger 4 which will attach to joists, pipes and other items typically found above ceilings.