Precision 2300 Apex Mortise Exit Device - Handed, Wide Stile View larger

Precision Hardware

Precision 2300 Apex Mortise Exit Device - Handed, Wide Stile


Item normally ships out within 2-4 Weeks (excluding transit time). Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.


Details: Precision 2300 Apex Mortise Exit Device - Handed, Wide Stile

Apex 2300 Series - Handed (Device Only)

Apex FL2300 Fire Exit Series - Handed (Device Only)


For all types of single and double door applications. Available for 1-3/4" thick, up to 4-0" wide opening. Furnished standard for 1-3/4" thick, 3'-0" wide opening.
Covers ANSI A115.1 (Type 86) Mortise Lock preparation.
Double Cylinder
Handed, "10" Function available. Requires one rim type cylinder and one 1-1/4" long mortise type cylinder, not furnished standard.
Base Material
The Cover, Touchbar, Device Channel, Lock/ Hinge Side Filler and End Cap are furnished of heavy wrought Brass, Bronze or Stainless Steel. US28 Devices are furnished with Aluminum, Brass, Bronze and Stainless Steel components.
Investment Cast Steel, Zinc Dichromated.
1/4" turn hex key dogging standard. NOT available on Fire Exit Hardware.
Touchbar Height
39-15/16" from floor standard.
Top Strike
No. S300 Surface applied, Investment Cast Stainless Steel, Black Powder Coated furnished standard.
Specify hand when ordering as RHRB or LHRB. Touchbar Assembly, Mortise Lock and Trim may be reversed in the field. For reversibility of complete device, mortise strike is required for the other hand.
UL Listed
Panic and Fire Exit Hardware. For FIRE EXIT HARDWARE Ratings see page 33. Conforms to UL10C and UBC 7-2.
Devices are BHMA certified for ANSI 156.3, Grade 1.
605, 606, 612, 613, 625, 626W, 628, 630
Mortise type, not furnished standard.
Retrofit Applications
The 2300 and FL2300 Series Devices are designed to retrofit into other manufacturers' mounting hole locations. 1700 Series Pull Trim and 4900 Series Lever Trim may also be factory set for these applications by specifying prefix "R" (e.g. 2308 R4908A). Consult factory for details.
Exit Series
Handed Fits doors machined per ANSI A115.1 (Type 86) Mortise Lock preparation.
Wrought Steel, Zinc Dichromate finish.
Lock Front Plate
8" x 1-1/4" Bronze, Brass or Stainless Steel, pivots for beveled or square edged doors.
Stainless Steel, Deadlocking, 3/4" throw, anti-friction.
Stainless Steel, sliding type.
LOCK FRONT PLATE and STRIKE 605, 606, 612, 613, 622, 625, 630, 690. 630 furnished for 626 and 628 locks.
No. S982, handed curved lip strike furnished standard.
Lock No. M303
01, 02 & 03 functions.
Lock No. M308
05, 08, 14 & 15 functions.
Lock No. M310
10 function.

Precision Apex 2000 Exit Devices Video


Write a review

Precision 2300 Apex Mortise Exit Device - Handed, Wide Stile

Precision 2300 Apex Mortise Exit Device - Handed, Wide Stile

More products from this category