Sargent 8800 Rim Exit Device w/ Thumb Piece & Pull Trim
As low as
- Model:
-
8800-42312778
-
Item normally ships out within 4-6 Weeks (excluding transit time).
Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.
Request for Quote
Details: Sargent 8800 Rim Exit Device w/ Thumb Piece & Pull Trim
Features
- Designed for standard width stile applications on wood and metal doors
- Also available as an HC8800 or WS8800 for hurricane-resistant applications, see Hurricane-Resistant section of the catalog
- Single point rim latching device
- Single door & double door applications with mullions
- Quiet operation and solid security
- ANSI/BHMA A156.3 - Grade 1
- UL10C (Fire) and UL305 (Panic) Listed
- Notes for Two-tone finishes - 2930 Finish: grip of lever is 32D, balance of lever is 32. Rose/escutcheon and lock finish will be 32, 3029 Finish: grip of lever is 32, balance of lever is 32D. Rose/escutcheon and lock finish will be 32D
- Note - FSL, FSW, MSL and PSB pulls are used with 12- 8804 and 8804 only, they are
- identical to FLL, FLW, MAL and PTB pulls except the cylinder hole is located 3/8" (9mm) lower.
Specifications
- Door Type
- Metal Doors
- Door Thickness
- 1-3/4" (44mm) minimum thickness.
- Stile
- 4-1/2" (114mm) minimum stile width
- Rail sizes as determined by door width
- E Rail for 24" to 32" door widths, No cutting required for 32" door, F Rail for 33" to 36" door widths, No cutting required for 36" door, J Rail for 37" to 42" door widths, No cutting required for 42" door, G Rail for 43" to 48" door widths, No cutting required for 48" door
- Strike
- 649 Standard Black Nylon Coated
- Dogging Feature
- Hex key dogging standard on non fired rated devices; specify 16- for cylinder dogging (
- Mounting Fasteners
- Supplied standard with wood and machine screws
- Latch Bolt
- Stainless steel, 3/4" (19mm) throw
- Device Centerline from Finished Floor
- 41" (1041 mm) for Standard Applications
- Center Case Dimensions
- 8-3/8" (213mm) x 2-5/8" (67mm)
- Projection
- Pushbar Neutral - 3" (76 mm), Pushbar Depressed - 2-1/8" (54 mm)
Applications
- Public Buildings & Facilities
- Commercial & Industrial Buildings
- Government & Military Facilities
- Retail & Strip Malls
- Multifamily & Mixed-Use