SDC AUTO Series Low Energy Swing Single Door Operator

AUTOS

Item is normally in stock and ships out within 3-5 Business days (excluding transit time). If out of stock it can take up to 2-4 weeks (excluding transit time).Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.

$2,110.50

25% Off

$2,814.00

Details: SDC AUTO Series Low Energy Swing Single Door Operator

SDC's operator is built with a stateof-the-art microprocessor-based unit that is self-tuning and self-learning while offering non-handed operation, full-mechanical stops and a variety of interface options for sensors, pushplates, fire alarms and electrified locks. SDC's operator is belt driven with a combination of gears and pulleys which requires less torque, less power, absorbs more abuse, and is quieter than other automatic door openers while complying with all US and Canadian ADA requirements. Onboard diagnostics simplifies troubleshooting for ease of installation and all SDC operators can be easliy configured for surface mounted push/ pull applications. ANSI certified not required for initial installation.

Features

  • Adjustable opening and closing speeds.
  • Single button, self-tuning setup
  • Adjustable hold-open time between 0 and 30 seconds.
  • Stop door on obstruction.
  • Push and Go operation
  • Fire Alarm input
  • Door Sequencing input
  • Door Interlock input
  • LED Status indication for all inputs
  • Extremely quiet operation
  • Momentary back pressure relief
  • Obstruction detection
  • Power close option
  • Hold-open timer
  • External function switches
  • Built-in 1 Amp power supply
  • Onboard lock sequencing
  • Preset dip switches for alternative functions
  • Customizable programming for system design
  • USB port to easily upload customized programming
  • Non-handed
  • Push or pull compatible
  • Spindles included
  • High traffic use

Specifications

Power Supply
115VAC @ 60Hz (+6%, -10%)
Power Consumption
100W
Current Consumption
1 Amp
Motor
24 VDC Permanent Magnet with Belt Driven Encoder
Header Dimension
4-1/2" H × 4-7/8" D
Fused Protection
3.5 Amp Fuse (F1 located on I/O Board)
Weight
22 lbs per Operator Assembly
Ambient Operating Temperature
-4 to 131°F
Ingress Protection
IP23 - protection from spray water up to 60° from the vertical - i.e. Rainstorm
Accessory / Lock Power Supply
24 VDC / 1 Amp +
Adjustable Timers
Hold Open Time, Opening & Closing Speed
Maximum Degree of Opening
130°

Standard Selector Switch Function

  • Automatic
  • Hold Open
  • Manual (Off)

Maximum Door Weight

PUSH Arm:PULL Arm
36" Door438 lbs342 lbs
42" Door328 lbs256 lbs
48" Door:254 lbs198 lbs

Standard Control Outputs

  • Electric Lock Control
  • 24 VDC Power Supply
  • Door Status (Fully Open & Fully Closed)
  • Alarm Signal

Standard Control Inputs

  • Interior Activation
  • Exterior Activation
  • Emergency Shutdown
  • Fire Alarm Input
  • Safety Device Input

Downloads

Auto EntryControl™

Auto EntryControl™ Installation

Available Model Numbers and Combinations

Model/SKUAttributes
AUTOS296V Dull Aluminium
AUTOS296X Dark Bronze
AUTOS336V Dull Aluminium
AUTOS336X Dark Bronze
AUTOS342V Dull Aluminium
AUTOS342X Dark Bronze
AUTOS348V Dull Aluminium
AUTOS348X Dark Bronze
AUTOS136V Dull Aluminium
AUTOS136X Dark Bronze
AUTOS142V Dull Aluminium
AUTOS142X Dark Bronze
AUTOS148V Dull Aluminium
AUTOS148X Dark Bronze
AUTOS172V Dull Aluminium

View All Model Numbers and Options

Reviews

Write a review

SDC AUTO Series Low Energy Swing Single Door Operator

SDC AUTO Series Low Energy Swing Single Door Operator

More products from this category