Reduced price! MVE-AH1T1-01Q_171228-500x500.png View larger

SECO-LARM

SECO-LARM MVE-AH1T1-01YQ HDMI Extender Over Two Wires

MVE-AH1T1-01YQ

Item is normally in stock and ships out within 2-3 Business days (excluding transit time). If out of stock it can take up to 2-4 weeks (excluding transit time).Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.

$453.62

30% Off

$648.03

Details: SECO-LARM MVE-AH1T1-01YQ HDMI Extender Over Two Wires

The ENFORCER HDMI Extender over Two Wires extends the range of traditional HDMI cabling methods by using an active transmitter and receiver to send video and audio over any two copper wires including Cat5e/6 cables, telephone wires, and coaxial cables. HDMI formats as large as 1080p can be transmitted up to 984ft (300m) between the two units with zero signal loss by using integrated circuits in the receiver and transmitter.

Features

  • Extends HDMI over two wires
  • Supports resolutions from 480i to 1080p with zero signal loss
  • Transmits up to 984ft (300m) at 1080p over two wires
  • Plug and play operation - comes as a complete set
  • HDMI Loop output for local HDMI display
  • Two (2) 12VDC power supplies included
  • Bi-directional RS-232 pass-through
  • IR Pass-through for remote control extension and operation

Specifications

Input Video Signal
3.3V
Input DDC Signal
5Vp-p (TTL)
Maximum Single Link Range
1080p
Deep Color
24bit
Video Format Supported
High-speed HDMI, HDCP 1.3
Audio Formats Supported
PCM
Output Video
HDMI
Resolutions Supported
1080p/1080i/720p/576p/576i/480p/480i
Range
Up to 984' (300m)
Maximum Input Cable Length
24AWG (15m), 26AWG (10m), 28AWG (5m)
Maximum Output Cable Length
24AWG (15m), 26AWG (10m), 28AWG (5m)
Video Input Connector
HDMI Type A 19-pin female
Video Output Connector
HDMI Type A 19-pin female
IR Pass-through Frequency
20-60 kHz
Operating Voltage
12VDC
RS-232 Pass-Through
Up to 115,200
Power Supply
2A:12VDC (2 Adapters) (2.1mm plug)
ESD Protection (Human Body Model)
plus or minus 8kV (Air-gap discharge), plus or minus 4kV (contact discharge)
Current Draw
Transmitter: 625mA:12VDC, Receiver: 580mA:12VDC
Operating Temperature
32 degree-140 degree F (0 degree-60 degree C)
Dimensions
5-1/8"x15/16"x3-7/16" (130x23x87 mm)
Weight
7.4-oz (210g) (Each)

Applications

  • Public Buildings & Facilities
  • Commercial & Industrial Buildings
  • Government & Military Facilities
  • Retail & Strip Malls
  • Multifamily & Mixed-Use

Downloads

Reviews

Write a review

SECO-LARM MVE-AH1T1-01YQ HDMI Extender Over Two Wires

SECO-LARM MVE-AH1T1-01YQ HDMI Extender Over Two Wires

More products from this category