Reduced price! SL305_drawing.gif View larger

Select Hinges

Select SL305 Concealed Pin & Barrel Continuous Hinge, Satin Stainless Steel

SL305

Item is normally in stock and ships out within 2-3 Business days (excluding transit time). If out of stock it can take up to 2-4 weeks (excluding transit time).Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.

$875.84

40% Off

$1,459.73

Details: Select SL305 Concealed Pin & Barrel Continuous Hinge, Satin Stainless Steel

Stainless steel hinge with door guard. Adjusta-Screw™ fasteners (right-hand thread) available at extra cost. For 1-3/4" doors weighing up to 600 lb., 48" max. door width.SL305 pin & barrel continuous hinges are BHMA Grade 1 certified.

Specifications

Material
14 gauge 304 stainless steel with 3/16" diameter 304 stainless pin. Long-life nylon medical bearings
Lengths
79", 83", 85", 95" and 119" lengths standard for nominal door heights. Custom lengths are available
Finish
US32D satin stainless steel (630)
Closers
Conventional overhead surface, concealed sliding arm overhead or floor closers may be used with SELECT hinges. Pivot-type floor closers (with a fixed, conflicting center pivot) must be replaced

Load/Frequency

For 1-3/4" doors, 48" wide (max.), weighing up to 400 pounds (medium-frequency) without frame or door reinforcement; up to 600 pounds (low-frequency) without frame or door reinforcement.

SL305 Hinge Screw Count

HINGE LENGTHDOOR SCREWSFRAME SCREWS
79"1818
83"2121
85"1818
95"2323
119"2727

Options

UL® Labeled Fire Rating

For use on single-mounted doors, up to 3 hours for hollow metal doors, 1-1/2 hours for hollow metal and composite core wood fire doors, and 20 minutes for wood doors.

Dust-Free (Medical)

  • Flanged double bearings are standard on all SELECT Pin & Barrel continuous hinges except Toilet Partition hinges.
  • Prevent metal-to-metal contact for longer hinge life
  • Eliminate dust for "clean room" applications.

Pin & Barrel Fasteners

Screw Pack (Default)
All SELECT Pin & Barrel Continuous Hinges and edge guards are shipped with a corresponding screw pack unless requested otherwise
Adjusta-ScrewTM
Designed to correct frame fit variances up to 3/8". Right-hand thread

Hospital Tip

Hinges can be prepared with slanted tips for hospitals and correctional facility applications. Handing required. Available only on SL300, SL305, SL315 and SL200.

Raised Barrel

Swaged door leaf for Concealed and Half Surface hinges allows door to open 180°. Handing required.

Security Studs

Stainless steel studs are mounted to frame leaf, door leaf is drilled to accommodate studs. 3 studs are required for hinge lengths up to 85", 4 studs are required for hinges longer than 85". Handing required. Door and frame must be specially prepared to accommodate security studs.

Blank Hinge

Holes are omitted for welded installations.

Preparation & Accessories

Feature

  • 3-hour Fire Rating

Dounloads

Select Hinge Performance

SELECT pin & barrel continuous hinges are built to handle abuse from high-tracc applications. They are applied to the surface on the edge of the frame and door. No machining or reinforcement is required.

On conventional hinges, opening and “kickback” energy concentrate on a few inches of fastened reinforcing plate — with the top hinge handling 100% of the force. Pinless SELECT hinges bond the door and frame into an integrated, sag-free unit. “Kick-back” energy dissipates along the entire length of the door and frame. (Compare this to a conventional hinge’s 4-1/2" to 5" at the top of the door and frame).

SELECT pin & barrel continuous hinges eliminate the gap between the door and frame, providing a weatherproof, rust-proof, tamper-proof barrier.

SELECT pin & barrel continuous hinges (excluding Toilet Partition hinges) are listed and tested by Underwriters Laboratories to meet the Positive pressure requirements of UL10C, and are in accordance with UBC 7.2 (1997). SELECT pin & barrel continuous hinges (excluding Toilet Partition hinges) are for use on swinging single fire doors (max. door opening of 4'x10') or pairs of fire doors (max. door opening of 8' x10'), including double egress, installed in masonry or drywall. SELECT pin & barrel continuous hinges (excluding Toilet Partition hinges) are rated for 20 minutes on labeled wood doors, 1-1/2 hours for labeled hollow metal and composite-core wood fire doors, and 3 hours (NO FIRE PINS OR STUDS REQUIRED) for labeled hollow metal doors mounted singly only.

SELECT Advantages

Corrosion-Resistant Stainless Steel

Stainless steel pin & barrel design creates a tough, highly secure opening.

Templated Hole Pattern

SELECT hinges line up perfectly, precisely, every time. Makes installation easier and faster

Dust-Free (Medical) Bearings

Prevent metal-to-metal contact and eliminate dust. Exclusive standard (no upcharge) on all SELECT Pin & Barrel hinges.

Variety of Finishes

Available in polished, brushed and painted finishes to match, contrast or accent your building’s design.

3-Hr. Fire Rating

Fire-rated out of the package. No extra parts to buy or install. No liability worries.

Stainless Steel Pin

Delivers high tensile strength by forming a strong, free-moving unit. Flexible and strong in abused openings.

End Caps

Spiral-knurled steel caps seal the barrel ends to contain hinge pin.

Adjusta-Screw™ Fasteners

Remedy out-of-square doors and fames easily. Correct fit variances up to 3/8" along full length of door.

Interchange Part Numbers for Geared Hinges:

Select Hinges Interchange Table
( Click "GREEN" items to view options )
SELECTMARKARHAGERPEMKOMCKINNEYSTANLEYABHIVES
SL300FM-300790-900SPBFMMCK FM300651A500700
SL302FS-302SPBFSMCK FS302657A502702
SL303HS-303790-903SPBHSMCK HS303A503
SL305HG-305790-905SPBFMDEGMCK HG305652A505705
SL306HG-306790-906MCK HG306655A506
SL308EG-308SDEGEG2/2BA528F
SL309FS/SC-309790-909SPBFSSCMCK FS309
SL310HG-310MCK HG310
SL311HG-311MCK HG311656A511711
SL315HG-315SPBFMEG
SL3500FM-3500SPBFMHD
SL402FS-402-TP
SL200FM-200FM3700641600
SL902FM-200FM3700641600

Select Pin & Barrel Continuous Hinge Comparison Table

All Select pin & barrel continuous hinges are BHMA Grade 1 certified

ModelTypeSizesMaterialLoad/Frequency
SL200Concealed79" - 95"14 gauge 1012 cold-rolled steel, 3/16" diameter 304 stainless pin.For 1-3/4" doors, 48" wide (max.), weighing up to 400 pounds (medium-frequency); up to 600 pounds (low-frequency).
SL300Concealed79" - 119"14 gauge 304 stainless steel, 3/16" diameter 304 stainless pin.For 1-3/4" doors, 48" wide (max.), weighing up to 400 pounds (medium-frequency); up to 600 pounds (low-frequency).
SL305Concealed79" - 119"14 gauge 304 stainless steel, 3/16" diameter 304 stainless pin.For 1-3/4" doors, 48" wide (max.), weighing up to 400 pounds (medium-frequency); up to 600 pounds (low-frequency).
SL315Concealed79" - 119"14 gauge 304 stainless steel, 3/16" diameter 304 stainless pin.For 1-3/4" doors, 48" wide (max.), weighing up to 400 pounds (medium-frequency); up to 600 pounds (low-frequency).
SL3500Concealed79" - 119"12 gauge 304 stainless steel, 3/16" diameter 304 stainless pin.For 1-3/4"—2" doors, 48" wide (max.), weighing up to 900 pounds.
SL310Swing Clear79" - 119"14 gauge 304 stainless steel barrel, 3/16" diameter 304 stainless pin.For 1-3/4" doors, 48" wide (max.), weighing up to 400 pounds (medium-frequency); up to 600 pounds (low-frequency).
SL311Swing Clear79" - 119"14 gauge 304 stainless steel barrel, 3/16" diameter 304 stainless pin.For 1-3/4" doors, 48" wide (max.), weighing up to 400 lb. (medium-frequency); up to 600 lb. (low-frequency).
SL303Half Surface79" - 119"14 gauge 304 stainless steel barrel, 3/16" diameter 304 stainless pin.For 1-3/4"doors, 48" wide (max.), weighing up to 400 lb. (medium-frequency); up to 600 lb. (low-frequency).
SL306Half Mortise79" - 119"14 gauge 304 stainless steel barrel, 3/16" diameter 304 stainless pin.For 1-3/4"doors, 48" wide (max.), weighing up to 400 lb. (medium-frequency); up to 600 lb. (low-frequency).
SL302Full Surface79" - 119"14 gauge 304 stainless steel barrel, 3/16" diameter 304 stainless pin.For 1-3/4" doors, 48" wide (max.), weighing up to 400 pounds (medium-frequency); up to 600 pounds (low-frequency).
SL309Full Surface79" - 119"14 gauge 304 stainless steel barrel, 3/16" diameter 304 stainless pin.For 1-3/4" doors, 48" wide (max.), weighing up to 400 pounds (medium-frequency); up to 600 pounds (low-frequency).
SL402Toilet Partition54"6463-T5 aluminum, 1/4" diameter 303 stainless steel self-closing pin assembly.For high-frequency partition doors 36" wide weighing up to 80 pounds. Consult factory for doors wider than 36".
SL902Toilet Partition54" & 57"14 gauge stainless steel, 1/4" diameter 303 stainless steel self-closing pin assembly.For high-frequency partition doors 36" wide weighing up to 80 pounds. Consult factory for doors wider than 36".

Available Model Numbers and Combinations

Model/SKUAttributes
SL30579SS 79"
SL30583SS 83"
SL30585SS 85"
SL30595SS 95"
SL305119SS 119"

Reviews

Write a review

Select SL305 Concealed Pin & Barrel Continuous Hinge, Satin Stainless Steel

Select SL305 Concealed Pin & Barrel Continuous Hinge, Satin Stainless Steel

More products from this category