Item is normally in stock and ships out within 3-5 Business days (excluding transit time). If out of stock it can take up to 2-4 weeks (excluding transit time).Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.
The TB200-SS/400-SS/600-SS Gate Closers are stainless steel automatic gate closers for use on commercial or residential gates. Unlike normal closing springs, the TB Series does not slam gates shut; rather it firmly pushes the gate closed, making it ideal for use with Lockey® security locks and other latching devices. The closing speed is pre-set to provide a controlled close of approximately 6 seconds, depending on the weight of the gate and quality of the hinges.
Closes large and small gates up to 250 lbs. (depending on the model) easily and gently
Made of stainless steel
Hydraulic/Nitrogen Gas controlled closing speed
Installs on side, top, middle or bottom of right or left hand gates
Mounts on opening side of gate, pushing the gate closed
Maximum opening angle of 110 degrees (LockeyUSA recommends use of a mechanical stop to restrict opening angle)
Mounting brackets and fitting bar included
The TB200-SS/400-SS/600-SS are not compatible with gates less than 30 inches wide
Tb200-Ss | 400-Ss | 600-Ss Opening Force Chart
No Closer3/4 lb.
Added Opening Force
Constant Closing Pressure
Added Force at 45 Degrees Open
NOTE: All measurements are taken using the 1st mounting hole on the post bracket with a 3" distance between the center of the hinge and the center of the post mounting bracket. The opening pressure will INCREASE using the 2nd, 3rd and 4th holes.These are "ADDED" opening pressures.This chart DOES NOT take into consideration the hinge arrangements, quality of hinges, ease of operation, wind, etc.