Reduced price! Adams Rite 7170-515-335-50 Electric Strike for Hollow Metal or Wood Door Jamb

View larger

Adams Rite 7170-515-335-50 Electric Strike for Hollow Metal or Wood Door Jamb

Model: 7170-515-335-50

Browse All Combinations

Voltage: 24V
Current and Duty: DC Continuous or Intermittent
Features: Fail-Safe
Finish: Black Anodized
Lip Extension: 1-3/8"

edit options

Write a review

Item normally ships out within 1-2 Weeks (excluding transit time). If out of stock it can take up to 3-4 weeks (excluding transit time). Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.

Details: Adams Rite 7170-515-335-50 Electric Strike for Hollow Metal or Wood Door Jamb

Gain total control over the comings and goings of your facility. With the Adams Rite 7170 Electric Strike for Hollow Metal or Wood Door Jambs you control the latch's mechanism from a remote location. Fits a variety of door jambs and includes the UltraLine and Fire-Rated strikes.

7170 Electric Strikes with 4-7/8” faceplates are designed for mortise or cylindrical type locksets with up to 3/4” latchbolt projection without deadbolt. For use in hollow metal or wood door jambs.

Remote electrical control of any door equipped with a mortise or cylindrical type lockset with up to 3/4” latchbolt projection without deadbolt. Electrical actuation unlocks strike jaw, releasing latchbolt so door can be opened without operating latch itself. Extremely compact mechanism fits into hollow metal jamb sections as shallow as 1-7/8”. Fits existing prep for discontinued Adams Rite 7560AN, 7570, 7860AN, 7870 Electric Strikes.

The electric strike must be positioned to accommodate offset mortise latches during installation. Please refer to installation instructions.

Specifications

Fail-Safe/Fail-Secure: Field convertible from one mode to the other. However, AC intermittent solenoid must not be used continuously in either.
Case: Approximately 1” x 3-3/8” x 1-7/8” deep.
Strike Lip: Basic 7170 strike has lip of proper length for 1-3/4” thick door that closes flush with jamb edge. Where door thickness or jamb shape differs from this standard relationship, lip extension kits are available, specified by last dash number.
Strike Opening: 5/8” x 1-7/16” x 5/8” deep. Bolt retainer jaw is stainless steel.
Faceplate: Measures 1-1/4 x 4-7/8” Faceplate is flat, with square corners. Available in a wide range of architectural finishes.
Voltage: Available in 12 or 24 volt AC and DC. DC continuous units are silent, AC intermittent units “buzz” on operation.

Current Draw/Amps

Volts	AC Intermittent	DC Continuous
12	1.42	0.33
24	0.74	0.17

Options: Available with two monitoring signal switches which sense whether latch bolt is in strike and whether strike jaw is blocked. Choice of voltage in AC and DC for intermittent or continuous duty. Specify assembled for either fail-secure (locked when unpowered) or fail-safe (locked when powered) operation, but can be field converted to the other mode.
4603 Rectifier: Converts AC to DC, installs in low voltage line between transformer and strike. Rated 2 amps (200 PIV)
4605 Transformer: Converts 120VAC to 12/24 VAC. Rated 40 Volt-amp output assures plenty of power for strike release. Patented mounting bracket fits in knockout hole of standard junction boxes.
4606 Transformer: Plug-in version for standard wall outlet.

Standard Package

Individually boxed with mounting screws. Includes mounting clips and adhesive shims for use where welded tabs are omitted.

About Adams Rite

Adams Rite designs, manufactures and markets door hardware products to the industrial, commercial, and institutional building construction industry. Carrying an extensive line of products including locks, latches, electric strikes, exit devices and integrated door assemblies, Adam's Rite has been providing security products to the United States and beyond for over 100 years. Standing by their tradition of developing new and innovative products, Adam's Rite builds their hardware to function well and to look good doing it, designing their products to complement the modern business aesthetic while meeting safety and access codes.

Adams Rite Warranty

Available Model Numbers and Combinations

Model/SKU	Attributes
7170-317-335-5	12V, DC Continuous or Intermittent, Monitor/Fail-Safe, Black Anodized, 2"
7170-410-626-7	16V, DC Continuous or Intermittent, Standard/Fail-Secure, Satin Chrome, 2-1/4"
7170-549-335-9	24V, AC Intermittent, Monitor/Fail-Secure, Black Anodized, 2-1/2"
7170-340-626-3	12V, AC Intermittent, Standard/Fail-Secure, Satin Chrome, 1-3/4"
7170-345-628-50	12V, AC Intermittent, Fail-Safe, Clear Anodized, 1-3/8"
7170-449-628-1	16V, AC Intermittent, Monitor/Fail-Secure, Clear Anodized, 1-1/2"
7170-515-626-5	24V, DC Continuous or Intermittent, Fail-Safe, Satin Chrome, 2"
7170-440-313-12	16V, AC Intermittent, Standard/Fail-Secure, Dark Bronze Anodized, 2-7/8"
7170-447-335-7	16V, AC Intermittent, Monitor/Fail-Safe, Black Anodized, 2-1/4"
7170-440-335	16V, AC Intermittent, Standard/Fail-Secure, Black Anodized, None
7170-419-313-7	16V, DC Continuous or Intermittent, Monitor/Fail-Secure, Dark Bronze Anodized, 2-1/4"
7170-517-3130	24V, DC Continuous or Intermittent, Monitor/Fail-Safe, Dark Bronze Anodized, 1-1/16" or less
7170-517-335-5	24V, DC Continuous or Intermittent, Monitor/Fail-Safe, Black Anodized, 2"
7170-519-628-5	24V, DC Continuous or Intermittent, Monitor/Fail-Secure, Clear Anodized, 2"
7170-415-313-3	16V, DC Continuous or Intermittent, Fail-Safe, Dark Bronze Anodized, 1-3/4"