Adams Rite 3700/8700 Series Starwheel Rim Exit Device

Materials

Pushbar made of extruded aluminum, clad or anodized in a variety of finishes

Handing

Device is non-handed. Lever Entry Trim is field reversible

Pushbar Length

Standard sizes: dimensioned for 30", 36", 42", and 48" openings. Standard width bars can be field cut to the next smallest opening width

Door Thickness

Suits 1¾" standard, up to 2¼"

Stile Width

3700 — Minimum 3¾". Door construction may require additional stile width to meet fire ratings and provide adequate strength. 8700 — Minimum 3¾"

Projection

2⅝" when fully projected, 1⅝"when dogged

Dogging

Standard dogging with hex key or cylinder dogging for 8700 Series only. Electric dogging also available for 3700 and 8700 Series

Fasteners

Standard self-tapping screws. Optional Sex Bolt Kits 26-0584 (two per device). Specify finish

Cylinders

(available separately)

Cylinder × Fixed Pull (Function 03)

Accepts any standard rim cylinder

3080 Entry Trim

(Functions 08, 09): Accepts any standard diameter mortise cylinder with MS® cam. Accommodates cylinder lengths from 1" to 1¼". (Available separately)

Warranty

Five year limited

Starwheel Bolt

1. When door closes, the interlocking noseguard and starwheel bolt close around the strike. The deadlocking slide spring over, locking the starwheel bolt to the strike.<br />2. When pushbar is depressed, the deadlocking slide moves back, allowing the door to unlock from the strike. This unique interlock provides solid security and prevents jamb spreading

Strike

Standard hardened steel strike (included)

Removable Mullion — 3889

Allows the use of rim exit devices on paired doors without narrowing the doors. Provides higher security and better traffic flow than paired doors with vertical rod exit devices. The 3889 is used for fire-rated applications or with non-rated devices on wood or hollow metal doors. Available in primer only. Specify door height when ordering

Options and Accessories

Silent Electrification Motorized Latch Retraction

The SE Motorized Latch Retraction option provides near-silent operation for quiet environments such as hospitals, offices, hotels, and libraries where solenoid-driven devices would be disruptive

Electric Latch Retraction:

The EL option uses a solenoid mounted in the pushbar for instantaneous unlocking and locking of the exit device from a remote location or access control device. The EL option is available for rim exit devices only

Alarmed Exit Device

This battery-operated option emits a loud (95 decibel) alarm to notify management of unauthorized exit. Available on minimum openign width 36". Cannot be ordered with other exit device options

Request to Exit (REX) — Monitor / Signal Switch

Mounted in the exit device pushbar on the hinge end, the switch can be used to activate signal light, horn, monitor, or other devices

Cylinder Dogging

For management control of dogging exit devices for life-safety exit devices only

Electric Dogging

A holding magnet keeps the pushbar depressed (set manually) and the latch retracted for lower profile exit devices, resulting in less damage and quieter operation

Matching End Caps

Matching end caps are available for applications where it is preferable that the end caps match the finish of the exit device. Available for US finishes only

Available Finishes

313 Dark Bronze Anodized, 335 Black Anodized, 628 Clear Anodized, US3 Bright Brass, US4 Satin Brass, US32 Bright Stainless, US32D Satin Stainless