Menu
$143.63 25% Off
$179.33 25% Off
$186.13 25% Off
$235.42 25% Off
$140.24 25% Off
$235.37 25% Off
$176.78 25% Off
$271.91 25% Off
$186.13 25% Off
$281.26 25% Off
$232.88 25% Off
$328.01 25% Off
$711.03 25% Off
$229.41 25% Off
$806.16 25% Off
$751.83 25% Off
$846.96 25% Off
$753.53 25% Off
$848.66 25% Off
$803.67 25% Off
$898.80 25% Off
$716.99 25% Off
$812.12 25% Off
$753.53 25% Off
$848.66 25% Off
$762.88 25% Off
$858.01 25% Off
$809.63 25% Off
$904.76 25% Off
$270.21 25% Off
$176.78 25% Off
$271.91 25% Off
$134.28 25% Off
$175.08 25% Off
$226.92 25% Off
$322.05 25% Off
The Above models are primarily used for new doors and frames. Both leaves are fully Mortised. They can also be used on renovations for a new door with an existing frame or an existing door with a new frame. These hinges will cover existing standard full Mortise hinge preps.
Standard | Metric | |
---|---|---|
Single Doors (Square Edged) | ||
A. Thickness of Hinge | 5/16" (10/32") | 8.0 mm |
B. Allowances for frame irregularities | 1/32" (1/32") | 0.8 mm |
C. Single Door Clearance on Lock side | 1/8" (4/32") | 3.2 mm |
Total | 15/32" | 12.0 mm |
Single Doors (Beveled Edged) | ||
A. Thickness of Hinge | 5/16" (10/32") | 8.0 mm |
B. Allowances for frame irregularities | 1/32" (1/32") | 0.8 mm |
C. Single Door Clearance on Lock side | 1/8" (4/32") | 3.2 mm |
D. Allowance for Beveled edge | 1/32" (1/32") | 0.8 mm |
Total | 16/32" | 12.8 mm |
Pairs of Doors (Square Edged) | ||
A. Thickness of Hinge | 5/16" (10/32") | 8.0 mm |
B. Allowances for frame irregularities | 1/32" (1/32") | 0.8 mm |
C. Recommended Edge to Edge clearance | 3/16" (6/32") | 4.8 mm |
D. Second allowance for frame irregularities | 1/32" (1/32") | 0.8 mm |
E. Second hinge thickness | 5/16" (10/32") | 8.0 mm |
Total | 28/32" | 22.4 mm |
Pairs of Doors (Beveled Edged) | ||
A. Thickness of Hinge | 5/16" (10/32") | 8.0mm |
B. Beveled Edge Allowance | 1/32" (1/32") | 8.0mm |
C. Allowances for frame irregularities | 1/32" (1/32") | 8.0mm |
D. Recommended Edge to Edge Clearance | 3/16" (6/32") | 4.8 mm |
E. Second Allowance for frame irregularities | 1/32" (1/32") | 8.0mm |
F. Second allowance for beveled edge | 1/32" (1/32") | 8.0mm |
G. Second Hinge Thickness | 5/16" (10/32") | 8.0 mm |
Total | 30/32" | 24 mm |