Menu
The 3400 series drop-bolt can be used on single acting inswing or outswing doors or double acting doors. These units provide reliable locking without the difficulties encountered with "shear" locks. Mounting options include the 3412 mortise mount and the 3402 surface mount unit.
Electric drop-bolts can be utilized on Herculite frameless glass doors up to ½" thick with the 3404 U-bracket receiver housing.
A unique logic circuit keeps the drop-bolt retracted until the door has been closed and is properly aligned to assure engagement of the lock bolt. The door position sensor mounted on the strike plate will work with a door gap of up to 3/16" and is fully adjustable to ensure correct operation in spite of poor door and frame alignment. The mechanical alignment ball on the 3412 face plate is adjustable over a wide range to compensate for excessive door gap and to improve accuracy. The door position sensor is disabled after the bolt is engaged to increase security.
The time delayed relock (time between door being closed and the bolt engaging) is selectable for up to 9 seconds by Dip Switch settings. A normally closed contact controls the lock bolt activation.
The drop-bolt requires less than 1 amp to extend and engage and draws only 0.3 amps in the holding mode. This design conserves power and extends the life of the drop-bolt.