Premium grade seals specially formulated to withstand greater temperature extremes while providing maximum protection against air infiltration
Excellent flexibility and memory
Flame resistant
Moisture resistant
Temperature range -100°F to 500°F, remains flexible at extreme temperatures
Excellent resistance to ozone, UV and aging
Recommended for areas using FM200 or Halon Fire Suppression Systems
BHMA Certified to ANSI/BHMA A156.22 performance tests for heat, cold, air infiltration and smoke infiltration
Fire-rated Astragal Seals cannot replace any astragal required on the door by the door manufacturer to maintain its fire label
IBC, NFPA 80, NFPA105, and NFPA 252 require the gap at the meeting edge between fire labeled doors must not exceed 1/8"
#6 × 3/4" stainless steel sheet metal screws furnished
Screw holes slotted for adjustment
Order as set to receive two pieces
Silicone plus is tan
Anodized aluminum
Options
Standards
CERTIFIED by UL to CAN/ULC-S104 and ANSI/UL10B, complies with NFPA 80 and NFPA 252 for application to Hollow Metal fire doors rated up to 3 Hrs., and Wood fire doors rated up to 90 minutes.
POSITIVE PRESSURE - CERTIFIED by UL to ANSI/UL10C, complies with IBC, NFPA 80 and NFPA 252 for application to Hollow Metal fire doors rated up to 3 Hrs., and Wood fire doors rated up to 90 minutes.
AIR INFILTRATION TESTED to ASTM E283, Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors.
SMOKE & DRAFT CONTROL GASKETING. Certified by UL to ANSI/UL10C and ANSI/UL1784 Category 'H'; complies with IBC and NFPA 105 for use on 'S' labeled Positive Pressure Hollow Metal fire doors rated up to 3 hours, and Wood fire doors rated up to 90 minutes.
ANSI/BHMA CERTIFIED. Certified Gasketing complies with American National Standard for Door Gasketing and Edge Sealing Systems ANSI/BHMA A156.22 and is listed in the BHMA Certified Products Directory.