Accepts Schlage standard or Primus/Everest large format interchangeable core cylinders
ANSI/BHMA: E07261
Cylinder diameter: 1-1/8"
Across flats: 7/8"
Mounting cutout: 1-5/32"
Max. material thickness: 1-5/16"
Min. material thickness: 0.08"
26D or US3 finish
Packed 10 per box
WARNING (Proposition 65)
Available Separately
720-3-3 long inverted cam
720-3-4 extra long 3" vertical cam
720-3-5 long inverted cam with shallow offset
Trim collars for extending the face of the lock out from casework material
SW-1 switch accessory pack turns your cam lock into an electronic switch lock
(see our SW-1 Product Data Sheet for more information)
CL-MP-118 Double D Metal Punch (punches a 7/8" × 1-1/8" cutout in sheet metal for cam lock installation)
Cores for locks
N/A - this lock is sold less cylinder
Will accept Schlage standard or Primus/Everest large format interchangeable core cylinders. For more information on Schlage IC core cylinders visit www.schlage.com.
Includes
720-PL3 stabilizer plate
720-3-1short inverted cam
720-3-2 long vertical cam
7788-PA-D plastic thumbturn to operate lock without core
All parts for lost-motion or key-retaining functions