Pemko _FS_ Full Surface Hinges

• BL (Black Anodized) and PW (Painted White) are special finishes available upon request.
• Fasteners - Frame Portion - All fasteners are #12-24 × 7/16" #10 FHUC, Type C, threadforming.
• Heavy duty model: 12 fasteners required for each leaf.
• Wood screws available on request (specify on order).
• Fasteners - Door Portion - a. Thru-bolt - 1/4-20 × 1-5/8". - Heavy Duty Hinges - 4 required. - b. Shoulder Bolt - 1/4-20 × 1" PCH. - Heavy Duty Hinges - 4 required. - c. Pan Head Self Drilling #12 × 3/4". - Heavy Duty Hinges - 6 required. d. #10 × 1-1/2" Truss Head SMS. - Heavy Duty Hinges - 6 required.
• Heavy duty hinge (HD1): 3" between bearing centers.
• Heavy duty hinge (HD3): 3" between bearing centers.
• HD1 hinges conform to Grade 2-150, Grade 1-300, and Grade 1-600 cycle requirements per BHMA standard ANSI/BHMA A156.26-2006.
• HD3 hinges conform to Grade 3-150, Grade 3-300, and Grade 3-600 cycle requirements per BHMA standard ANSI/BHMA A156.26-2006.
• Tested and certified by Underwriters Laboratories Inc. (USA and Canada) to standard UL10B, UL10C and UBC 7.2 (positive pressure) for up to a 3-Hour (A-Label) fire listing for all 4 ft. 0 in. × 10 ft. 0 in.
• and 8 ft. 0 in. × 10 ft. 0 in. door and frame assemblies. Fire listing certifications apply to all approved hollow metal and wood door assemblies in drywall or masonry construction.
• Aluminum continuous hinge for use on swinging type fire doors of the hollow metal, tin-clad, sheet metal and steel covered composite type rated up to 3 hours, wood covered composite type rated up to and including 1-1/2 hours. Also wood core rated up to and including 20 minutes without hose stream.
• All hinges meet criteria of UBC 7.2 for positive pressure.
• Special FirePins are only required on 3-Hour (A-Label) assemblies.
• Certain door and frame conditions may require an extra 1/32"-1/16" clearance. Excessive clearance on fire rated assemblies may violate the requirements for NFPA 80.
• PemkoHinge® products are guaranteed for the life of the opening against defects in material or workmanship wit hthe exception of AL, RS, standard duty and Grade 3 hinges, which carry a 10 year warranty.
• Weight bearing (per BHMA standard ANSI/BHMA A156.26-2006) for heavy duty models: 83" and 85" = 27 bearings, door weight = 540 lbs.; 95" = 31 bearings, door weight = 620 lbs.; 120" = 39 bearings, door weight = 780 lbs.
• Special hinge reinforcements are not required. Hollow metal door and frame manufacturers' standard is acceptable. Removal of hinge reinforcements in the door and frame is not advised.
• Width: 1-1/4" (31.8 mm) (frame side - leaf).
• Width: 1-3/8" (34.9 mm) (door side - leaf).
• Cap Width: 25/32" (19.8 mm).
• Height: 29/32" (23.0 mm) (total height of hinge).

Ratings

• BHMA Certified
• Fire Rated - UL10C - Positive Pressure
• PemkoHinge Fire Rating - UL76Y2

Finishes

• BLFSHD1: BL - Black Anodized Aluminum, (Special Order Finish)
• BLFSHD3: BL - Black Anodized Aluminum, (Special Order Finish)
• CFSHD1: C - Clear Anodized Aluminum
• CFSHD3: C - Clear Anodized Aluminum
• DFSHD1: D - Dark Bronze Anodized Aluminum
• DFSHD3: D - Dark Bronze Anodized Aluminum
• GFSHD1: G - Gold Anodized Aluminum, (Special Order Finish)
• GFSHD3: G - Gold Anodized Aluminum, (Special Order Finish)
• PWFSHD1: PW - Painted White Aluminum, (Special Order Finish)
• PWFSHD3: PW - Painted White Aluminum, (Special Order Finish)
• SNFSHD1: SN - Satin Nickel Anodized Aluminum, (Special Order Finish)
• SNFSHD3: SN - Satin Nickel Anodized Aluminum, (Special Order Finish)