Rubber ramps meet the requirements of ADAAG-2010; CABO/ANSI A117.1-2013; UBC; and California Title 24, Part 2.
Rubber ramps are extruded from styrene butadiene rubber, a long-lasting, weather and ozone-resistant, abrasion and impact-resistant, and fire retardant material.
Rubber ramps are sold in one foot increments up to 15-footLength.
Rubber ramps can be butted together for longerLength.
Rubber ramps are cut square on each end but are with molded rubber miter returns which can be glued to each end for a more pleasing appearance.
Fire retardant rubber ramps are easy to install on most surfaces (including wood, concrete, tile and asphalt), using a construction adhesive. Mechanical fasteners are not required and not recommended.
Rubber ramps are also portable. For temporary applications, an assembly which has been bonded together but has not been bonded to a base surface, stays in place by its sheer weight and can be removed from one opening and placed at another opening.
Use RR200 (T-Rex) to glue rubber ramps to floor surfaces.
Rubber ramps are for 1/2" and 1" offset heights.
Rubber ramps can be cross-cut toLength or ripped to a custom offset height using a table or radial arm saw with a carbide-tipped blade. These modifications must be made in the field.