> >>Browse Combinations

Sargent 8200 Series Mortise Lock w/ Standard Lever & Freewheeling FE Trim

Showing 1 - 50 of 9856 items

The Freewheeling Mortise Trim is designed for areas that are susceptible to vandalism including schools, universities, public buildings, back doors of businesses and any exterior doors where excessive or abusive force might be applied to the lever handle trim.

This design allows the outside lever handle to swing freely, down to 70 degree, in the "locked" mode. This eliminates resetting the trim after vandalism attempts because the lever automatically returns to its original position.

Features

  • For 1-3/4" (44mm) doors standard.
  • Vandal resistant trim
  • Meets or exceeds ANSI/BHMA A156.13 Series 1000 Operational Grade 1 and Security Grade 1.
  • Forged brass outside escutcheon trim provides added protection against vandalism (32 and 32D finishes not available)
  • Stainless steel lever bushing protects against wear
  • Stainless steel lugs and through-bolted trim design for proper alignment and increased security
  • Lever designs J, L and P have lever returns within 1/2" (13mm)
  • Cylinder will protrude from escutcheon face on double cylinder functions only
  • Cylinder sizes no. 46 (1-3/4") outside, no. 41 (1-1/8") inside standard on 1-3/4" (44mm) doors
  • Specify hand. Easily field rehanded
  • Can not be used as the inside cylinder with freewheeling trim (no. 41 cylinder required)
  • Note: Maximum projection varies by lever design. Largest projection is "A" lever - 3-9/16" (90mm)

Applications

  • Schools
  • Universities
  • Public Buildings
  • Back Doors of Businesses
  • Any Exterior Doors Where Excessive or Abusive Force Might Be Applied To The Lever Handle Trim

Downloads

How to Remove the Cylinder on All SARGENT Mortise Locks

Changing Functions on SARGENT 8200 Series Mortise Locks

How to Change Handing on SARGENT 8200 Series Mortise Lock

How to Install the SARGENT 8200 Series Mortise Lock