Sargent 8400 Narrow Stile Concealed Vertical Rod Exit Device w/ ET Trim & Gramercy Lever

Showing 1 - 50 of 40128 items

The 80 Series exit device is ideal for environments that require strong and durable security solutions. Made to last the lifetime of the building, this device easily exceeds ANSI/BHMA Grade 1 requirements for cycle and strength and is available in rim, mortise, surface vertical and concealed vertical rod configurations. With a modular design, this device has been crafted to be maintenance-free and provide unsurpassed security for any facility.

Features

  • Designed for narrow stile applications (e.g., full glass doors)
  • Concealed rods for security and aesthetics
  • UL10C (Fire) and UL305 (Panic) listed
  • Specify NB- for less bottom rod
  • NB- Devices allows free access for wheelchairs and carts. No bottom strike eliminates tripping potential
  • All functions determined by outside trim
  • Devices are ANSI/BHMA A156.3 - Grade 1
  • Notes for Two-tone finishes - 2930 Finish: grip of lever is 32D, balance of lever is 32. Rose/escutcheon and lock finish will be 32, 3029 Finish: grip of lever is 32, balance of lever is 32D. Rose/escutcheon and lock finish will be 32D

Specifications

Door Type
Hollow Metal Doors (MD), Hollow or extruded aluminum doors (AD)
Door Thickness
1-3/4" (44mm) minimum thickness
Stile
1-3/4" (44mm) minimum stile width required. Stile must be hollow with inside dimension of at least 1-3/8" (35mm) square
Rail sizes determined by door width
E Rail for 24" to 32" door widths, F Rail for 33" to 36" door widths, J Rail for 37" to 42" door widths, G Rail for 43" to 48" door widths
Strike
650 Top Strike & 606 Bottom Strike (Panic and Fire Rated) [MD], 640 Strike for Top & Bottom (AD)
Dogging
Feature Hex key dogging standard on non fired rated devices; specify 16- for cylinder dogging (
Mounting Fasteners
Supplied standard with machine screws
Top Bolt
Stainless steel
Device Centerline from Finished Floor
41" (1041mm) for Standard Applications, 38" (965mm) for elementary schools
Door/Opening Height
Must be specified, 120" (3048mm) Max Door Opening
Center Case Dimensions
8-3/8" (213mm) × 2-5/8" (67mm)
Projection
Pushbar Neutral - 3" (76 mm), Pushbar Depressed - 2-1/8" (54mm)

Applications

  • Public Buildings & Facilities
  • Commercial & Industrial Buildings
  • Government & Military Facilities
  • Retail & Strip Malls
  • Multifamily & Mixed-Use

Downloads

56- Latch Retraction in Power Mode

56- Latch Retraction in Timer Mode

Unboxing a 59- Electroguard Delayed Egress Exit Device

59- Electroguard Diagnostic LEDs

How to Change the Function on a SARGENT ET Lever Trim