> >>>>Command Access LPM1 Electrified Latch Pullback, Retrofit Schlage Chassis Only
Reduced price! Command Access LPM1 Electrified Latch Pullback, Retrofit Schlage Chassis Only View larger

Command Access Technologies

Command Access LPM1 Electrified Latch Pullback, Retrofit Schlage Chassis Only

LPM1

Item normally ships out within 1-2 Weeks (excluding transit time). If out of stock it can take up to 3-4 weeks (excluding transit time). Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.

$809.60

12% Off

$920.00

Details: Command Access LPM1 Electrified Latch Pullback, Retrofit Schlage Chassis Only

The Command Access LPM1 series mortise lock utilizes a high quality Grade 1 chassis built to withstand years of abuse. This unique model brings latch retraction to a standard mortise lockset. Requiring no special door prep, this is the perfect solution for push-pull conditions, handicap access, and for automatic operators where panic devices are not necessary. The LPM1 takes advantage of out patented PM300 technology, allowing for favourable wire runs and multiple locks on one power supply. It is field handible and available in Fail Secure (EU) functionality. This mortise lock uses standard 'type 86' door prep and can retrofit to Schlage L9000 compatible trim. We offer this model as chassis only or with complete trim.

Features

  • No special lock prep required - fits standard mortise pocket prepped for a Schlage "L" series lock.
  • Utilizes our patented PM/PWM technology.
  • Circuitry allow for momentary or continuously on "push/pull" applications.
  • Available is complete locksets or in chassis only (retrofits to Schlage "L" series compatible trim).
  • Must be used with a Command Access PS210,PS1, PS220/220B/ PS440B, or PS5-4 power supply.
  • No hassle 3-Year Warranty

Specifications

Operating Voltage
24 VDC (+/- 10%)
Holding Current Amperage
260mA@24VDC
Surge Current Amperage
1.9A for 350ms@24VDC
Peak Current
7 A @ 24VDC
Solenoid coil resistance
1.75 ?
Wire gauge
Minimum 18 gauge
300' with 18ga wire
LEVER SOLENOID SPECIFICATIONS
Operating Voltage
24VAC/DC (+/- 10%)
Amperage
24v = 350mA
Solenoid coil resistance
24v = 69?

Applications

  • Public Buildings & Facilities
  • Commercial & Industrial Buildings
  • Government & Military Facilities
  • Retail & Strip Malls
  • Multifamily & Mixed-Use

Downloads

Available Model Numbers and Combinations

Model/SKUAttributes
LPM110 Passage EU, Not Included, Not Included, Not Included
LPM110CHDPS Passage EU, Not Included, Not Included, Included
LPM110CHLBM Passage EU, Not Included, Included, Not Included
LPM110CHLBMCHDPS Passage EU, Not Included, Included, Included
LPM110CHREX Passage EU, Included, Not Included, Not Included
LPM110CHREXCHDPS Passage EU, Included, Not Included, Included
LPM110CHREXCHLBM Passage EU, Included, Included, Not Included
LPM110CHREXCHLBMCHDPS Passage EU, Included, Included, Included
LPM180 Storeroom EU, Not Included, Not Included, Not Included
LPM180CHDPS Storeroom EU, Not Included, Not Included, Included
LPM180CHLBM Storeroom EU, Not Included, Included, Not Included
LPM180CHLBMCHDPS Storeroom EU, Not Included, Included, Included
LPM180CHREX Storeroom EU, Included, Not Included, Not Included
LPM180CHREXCHDPS Storeroom EU, Included, Not Included, Included
LPM180CHREXCHLBM Storeroom EU, Included, Included, Not Included

View All Model Numbers and Options

Reviews

Write a review

Command Access LPM1 Electrified Latch Pullback, Retrofit Schlage Chassis Only

Command Access LPM1 Electrified Latch Pullback, Retrofit Schlage Chassis Only

More products from this category