View larger

SECO-LARM E-964-S50TB 50ft Mini Single Photobeam Sensor

Model: E-964-S50TB

Write a review

Item is normally in stock and ships out within 2-3 Business days (excluding transit time). If out of stock it can take up to 2-4 weeks (excluding transit time).Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.

Details: SECO-LARM E-964-S50TB 50ft Mini Single Photobeam Sensor

The E-964-S50TB is a simple, easy-to-use, and easy-to-install single-beam infrared motion sensor with 4 selectable frequencies. The device easily installs almost anywhere to provide an invisible beam that, when broken, sends a signal to activate a light, beeper, or other devices. This makes the device perfect for use as part of an access control system, a door or window monitor, a retail store customer alert, or many other places where the user needs to know that someone has entered a specific room or building or other protected areas. The E-964-S50TB is weather-proof, and comes with a built-in AGC control circuit that helps to filter out possible disturbance caused by local lighting conditions.

Features

4 selectable frequencies to reduce interference
Up to 50ft (15m) sensing distance
Small size for a less conspicuous installation
Simple to install
Built-in AGC control to filter out lighting disturbances
Signal strength indicator for easier alignment
LED indicators for power, signal strength, and trigger
Weatherproof for outdoor as well as indoor use (IP65)
Mounting hardware included

Specifications

Type: IR Multi-Frequency Single Beam Sensor
Current Draw: Transmitter- 15mA:12VDC, Receiver- 30mA:12VDC
Number of Beam Frequencies: 4
Number of Beams: 1
Sensing Range: Up to 50ft (15m)
Infrared LED Wavelength: 940nm
Operating Voltage: 10-24VDC
Interupt Speed: 50ms
LED Beam Spread Angle: Approximately plus or minus 10 degree
LEDs - Red: Indicates transmitter and receiver are not aligned or beam is broken (Alarm)
LEDs - Yellow: Dims/off when receiver's signal is weak / off when beam is broken
LEDs - Green: Indicates connected to power
Output: NO/NC relay (set by jumper, default is N.C.) 0.5A:30VAC/VDC
Operating Humidity: 0-95 percent
Operating Temperature: -13 degree-131 degree F (-25 degree-55 degree C)
Dimensions: 3-11/16" x 2-3/8" x 1-13/16" (94 x 60 x 46 mm)
Weight: 2.6-oz (74g)
Enclosure: Weatherproof IP65

Applications

Public Buildings & Facilities
Commercial & Industrial Buildings
Government & Military Facilities
Retail & Strip Malls
Multifamily & Mixed-Use

Downloads

SECO-LARM Warranty