Menu
AJW UG1-A UG1-A24 18" Concealed Snap Flange, 1" Diameter Grab Bar - Configuration A
UG1-A24
Warning: Last items in stock!
Availability date:
Item normally ships out within 2-4 Weeks (excluding transit time). Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.
Fabricated of type 304 #18 ga stainless steel with a #4 satin finish. Available in 1" outside diameter. All bends are formed by an automatic mandrel bending process. All bars maintain a constant 1½" offset.
Snap flanges are fabricated of 3" diameter,⅜" deep drawn type 304 #22 ga stainless steel with #4 satin finish to match tubing. Flanges have dimples that secure over mounting plate.
Bars with a projection no more than 5" off finished wall will sustain loads in excess of 900 lbs. When properly mounted. Bars with more than 5" projection will sustain a load of 250 lbs for 5 minutes when properly mounted.
Before installing grab bars, verify with all state and local codes for requirements on bar diameter and type finish. Recommended mounting heights for grab bars are 33" - 36" centerline above finished floor. All mounting of grab bars when possible should have in wall mounting back plates. Find centerline mounting points and place bar on line making sure to be on center. Transfer mounting points (3 per flange) to wall. Drill pilot holes and secure bar with proper anchors per application. Snap cover over mounting plate.
Model/SKU | Attributes |
---|---|
UG1-A18 | 18" |
UG1-A24 | 24" |
UG1-A30 | 30" |
UG1-A36 | 36" |
Modric HO18010 Holt Doc M Pack, European Oak
$10,454.40 20% Off $13,068.00
Kingston Brass GB123 Commercial Grade Grab Bar- Exposed Screws
$30.52 35% Off $46.95
ASI 164 Security Grab Bar - 36"L - Front Mount
$146.78 25% Off $195.70
Ponte Giulio G25JBS06 Contractor Anti-microbial Vinyl Coated Corner Grab Bar...
$209.30 20% Off $261.62
BHP QE QE Series Grab Bars 1-1/4" O.D. Exposed
$23.32 40% Off $38.86
Kingston Brass GB124 Commercial Grade Grab Bar- Exposed Screws
$36.37 35% Off $55.95
Ponte Giulio G18UAS Prestigio Plus Straight Grab Bars & HUG Collection
$83.76 20% Off $104.70
Seachrome GW Zuma Grab Bar, 16" x 11-3/4" x 16 Length
$186.26 10% Off $206.95
Ponte Giulio G57JAS0 Stainless Steel Straight Grab Bar
$16.56 20% Off $20.70
Ponte Giulio Y96SES58 Beast Grab Bar Fastener
$42.43 20% Off $53.04
Ponte Giulio G40JE Maxima Combination Grab Bar and Towel Holder Bar
$111.07 20% Off $138.84
Ponte Giulio G55S1 SS 110° Angled Grab Bar, 12"x12", 1 1/4", Satin
$35.85 20% Off $44.81
Whitehall 1110-3 Two-Wall Grab Bar, L-Shaped Closure Plate
Pamex BGBSS Exposed Screws Grab Bar, Satin Stainless Steel
$30.28 40% Off $50.46
Whitehall 1110-7 18" Grab Bar, L-Shaped Closure Plate
Kingston Brass DR914 Camelon Decorative Grab Bar
$109.82 35% Off $168.95
ASI 161 Security Grab Bar - 30"L - Chase Mount
$202.28 25% Off $269.70
Ponte Giulio G56JCS03N1 Stainless Steel Wall & Floor Mount Grab Bar, Satin...
$85.20 20% Off $106.50
Kingston Brass GB124 Commercial Grade Grab Bar- Concealed Screws & Textured Grip
$45.47 35% Off $69.95
Whitehall 1109-4 36" Grab Bar, Flat Closure Plate
$3.75 25% Off $5.00
Kingston Brass DR514 Manhattan Designer Grab Bar,1-1/4" OD
$70.82 35% Off $108.95
Seachrome GXBB Bariatric Grab Bar, Polished Stainless Steel
$101.93 10% Off $113.25
Seachrome 791 Series- Coronado Grab Bar, 1-1/4" O.D., Concealed Flanges,...
$122.27 10% Off $135.85
Seachrome GW-3930-QCR Newport Grab Bar w/ Towel Bar, 30" x 6-5/16" Size
$159.62 10% Off $177.35
Kingston Brass DR714 Metropolitan DR Grab Bar, 1-1/4” OD
Bobrick B-5897 Two-Wall Toilet Compt. Grab Bar 42" W x 54" D (107 x 137cm) 1...
$206.70
Ponte Giulio G01JAS1 Maxima Super Long Wall To Floor Vinyl Support Grab Bars
$136.66 20% Off $170.83
Whitehall 1110-4 36" Grab Bar, L-Shaped Closure Plate
Seachrome GW-4339-Q Series Wall-To-Floor Swing Away Grab Bar
$634.73 10% Off $705.25