> >>>Alpha Communication SDACT-2 Serial Dialer and Digital Communicator
Alpha Communication SDACT-2 Serial Dialer and Digital Communicator View larger

Alpha Communications

Previous Next

Alpha Communication SDACT-2 Serial Dialer and Digital Communicator

SDACT-2

Item normally ships out within 1-2 Weeks (excluding transit time). If out of stock it can take up to 3-4 weeks (excluding transit time). Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.

$1,439.95

Details: Alpha Communication SDACT-2 Serial Dialer and Digital Communicator

The Alpha Communications / Keltron SDACT-2 is a unique solution that interfaces with emergency-call, access control, building management and other systems to enable an appropriate and instantaneous response from personnel at a central or remote monitoring location. The SDACT-2 provides a bridge to an on- or off-site central station-style digital receiver through the dial-up public switched telephone network (PSTN).The SDACT-2 accepts pre-defined ASCIII RS232 data strings and converts to SIA, a standard, digital receiver-compatible, alarm reporting format.

Features

  • RS232 Port enables accurate monitoring of event type and location identification
  • Test code call-in cycles are programmable. A manual test button is also included
  • Transmits signals in industry standard SIA format
  • Works with a variety of alarm notification equipment
  • Zones 1-4 supervised EOL, suitable for fault-contact monitoring
  • Zones 5-7 are available for loss of AC and battery fail indications, which are also reported using standard SIA event codes
  • Local LEDs and audible devices clearly indicate Serial Dialer status

Specifications

Phone Lines
2 RJ45 receptacles. Line seizure via RJ31x jack (by others)
Hardwired Zone Inputs
7 (4-EOL resistor supervised). EOL resistor value 10K Ohms.
Audible Device
rated at 92DB
Ringer Equivalence
.1
FCC Reg.US
KELAL00BSDACT-2
User Controls
Jumper (8 total) and Pushbuttons: Reset, Manual Test, Silence, Program.
Power Requirements
Power Input - regulated or unregulated, filtered 20.4 to 27.5VDC
Power Draw
75mA Idle, 200mA all alarm or lamp test
Programming and Monitoring Port
DB-9F RS-232

Applications

  • Public Buildings & Facilities
  • Commercial & Industrial Buildings
  • Government & Military Facilities
  • Retail & Strip Malls
  • Multifamily & Mixed-Use

Downloads

Product Specification

Reviews

Write a review

Alpha Communication SDACT-2 Serial Dialer and Digital Communicator

Alpha Communication SDACT-2 Serial Dialer and Digital Communicator

More products from this category