> >>Browse Combinations

Select SL200 Concealed Pin & Barrel Continuous Hinge, Zinc Plated Carbon Steel

Showing 1 - 4 of 4 items

Zinc plated carbon steel. 1/8" door inset. For 1-3/4" doors weighing up to 600 lb., 48" max. door width. SL200 pin & barrel continuous hinges are BHMA Grade 1 certified.

Specifications

Material
14 gauge 1012 cold-rolled steel with 3/16" diameter 304 stainless pin. Long-life nylon medical bearings
Lengths
79", 83", 85"and 95" lengths standard for nominal door heights. Custom lengths are available
Finish
Zinc plated carbon steel
Closers
Conventional overhead surface, concealed sliding arm overhead or floor closers may be used with SELECT hinges. Pivot-type floor closers (with a fixed, conflicting center pivot) must be replaced

Load/Frequency

For 1-3/4" doors, 48" wide (max.), weighing up to 400 pounds (medium-frequency) without frame or door reinforcement; up to 600 pounds (low-frequency) without frame or door reinforcement.

SL200 Hinge Screw Count

HINGE LENGTHDOOR SCREWSFRAME SCREWS
79"1818
83"2121
85"1818
95"2323

Options

UL® Labeled Fire Rating

For use on single-mounted doors, up to 3 hours for hollow metal doors, 1-1/2 hours for hollow metal and composite core wood fire doors, and 20 minutes for wood doors.

Dust-Free (Medical)

  • Flanged double bearings are standard on all SELECT Pin & Barrel continuous hinges except Toilet Partition hinges.
  • Prevent metal-to-metal contact for longer hinge life
  • Eliminate dust for "clean room" applications.

Hospital Tip

Hinges can be prepared with slanted tips for hospitals and correctional facility applications. Handing required. Available only on SL300, SL305, SL315 and SL200.

Raised Barrel

Swaged door leaf for Concealed and Half Surface hinges allows door to open 180°. Handing required.

Security Studs

Stainless steel studs are mounted to frame leaf, door leaf is drilled to accommodate studs. 3 studs are required for hinge lengths up to 85", 4 studs are required for hinges longer than 85". Handing required. Door and frame must be specially prepared to accommodate security studs.

Blank Hinge

Holes are omitted for welded installations.

Preparation & Accessories

Electrical

Feature

  • 3-hour Fire Rating

Hospital Tip

Hospital Tip Prep

Downloads