> >>Browse Combinations

Select SL310 Swing Clear Pin & Barrel Continuous Hinge, Satin Stainless Steel

Showing 1 - 5 of 5 items

Stainless steel hinge with swing-clear action. Door guard. Adjusta-Screw™ fasteners (right-hand thread) available at extra cost. For 1-3/4" doors weighing up to 600 lb., 48" max. door width. SL310 pin & barrel continuous hinges are BHMA Grade 1 certified.

Specifications

Material
14 gauge 304 stainless steel barrel with 3/16" diameter 304 stainless pin. Long-life nylon medical bearings
Lengths
79", 83", 85", 95" and 119" lengths standard for nominal door heights. Custom lengths are available
Finish
US32D satin stainless steel (630)
Closers
Conventional overhead surface, concealed sliding arm overhead or floor closers may be used with SELECT hinges. Pivot-type floor closers (with a fixed, conflicting center pivot) must be replaced

Load/Frequency

For 1-3/4" doors, 48" wide (max.), weighing up to 400 pounds (medium-frequency) without frame or door reinforcement; up to 600 pounds (low-frequency) without frame or door reinforcement.

SL310 Hinge Screw Count

HINGE LENGTHDOOR SCREWSFRAME SCREWS
79"1818
83"2121
85"1818
95"2323
119"2727

Options

UL® Labeled Fire Rating

For use on single-mounted doors, up to 3 hours for hollow metal doors, 1-1/2 hours for hollow metal and composite core wood fire doors, and 20 minutes for wood doors.

Dust-Free (Medical)

  • Flanged double bearings are standard on all SELECT Pin & Barrel continuous hinges except Toilet Partition hinges.
  • Prevent metal-to-metal contact for longer hinge life
  • Eliminate dust for "clean room" applications.

Pin & Barrel Fasteners

Screw Pack (Default)
All SELECT Pin & Barrel Continuous Hinges and edge guards are shipped with a corresponding screw pack unless requested otherwise
Adjusta-Screw
Designed to correct frame fit variances up to 3/8". Right-hand thread

Security Studs

Stainless steel studs are mounted to frame leaf, door leaf is drilled to accommodate studs. 3 studs are required for hinge lengths up to 85", 4 studs are required for hinges longer than 85". Handing required. Door and frame must be specially prepared to accommodate security studs.

Blank Hinge

Holes are omitted for welded installations.

Preparation & Accessories

Feature

  • 3-hour Fire Rating

Downloads