> >>Browse Combinations

Select SL60 Toilet Partition Geared Hinge

Showing 1 - 2 of 2 items

Anodized aluminum toilet partition hinge. Opens to 180 °. 57" length. Anodized aluminum toilet partition hinge. Self-closing. Opens to 120 °. 57" length.

Specifications

Material
Extruded 6063 T6 aluminum alloy with selflubricating polyester thrust bearings
Length
57" length standard for nominal door heights. Custom lengths are available. SL62: 43-1/2" min
Finishes
All SL60 and SL62 hinges are stocked in Clear anodized aluminum. Custom anodized or painted finishes are available. Product painted or anodized in the field voids the SELECT hinge warranty

Load/Frequency

For high-frequency partition doors 36" wide (max.) weighing up to 80 pounds without frame or door reinforcement.

SL60/SL62 Hinge Screw Count

HINGE LENGTHDOOR SCREWSFRAME SCREWS
57"55

Options

Header Gap Prep

No more shimming! Door leaf trimmed 1/8" at the top and bottom to incorporate clearance required for installation. No handing required; available on all models.

Security Option

Non-removable bearing added at top of hinge to prevent material from falling into the opening between cap and gears. Hinge must be installed with security bearing at top of door. Handing required, except for SL11, SL27, SL38 and SL40. Not available with Hospital Tip.

Tamper-Resistant Hinge

Entire hinge prepared with set screws installed in every other bearing and tightened against inside of gear cap for additional security against tampering.

Geared Hinge Fasteners

SDTF
12-24 × 3/4", Self-Drilling, Thread-Forming, 410 SS Screws, Phillips Undercut Flathead
TF
12-24 × 1/2", Thread-Forming, 410 SS Screws, Phillips Undercut Flathead (Pilot hole required)
WD
12-14 × 1-1/2", 410 SS Wood Screws
WD/SDTF
12-14 × 1-1/2", 410 SS Wood Screws and 12-24 × 3/4", Self-Drilling, Thread-Forming, 410 SS Screws
WD/TF
12-14 × 1-1/2", 410 SS Wood Screws and 12-24 ×-1/2", Thread-Forming, 410 SS Screws

Downloads