Details: LGAPMVC12-2 Series 1000 Alarm Panel Manual Valve Controller

The Series 1000 Alarm Panel Valve Controller has connection terminals that allow the Leak Gopher valve to be controlled by contact closures from a conventional security system. If your security system has water sensors, simply program the system to close a normally open contact when a water sensor gets wet and connect that contact to terminals on the Leak Gopher. When the contact closes the water will be turned off. You can use another set of terminals to open the valve if you choose. There is also a set of terminals to power the Leak Gopher from the 12VDC power supply in the alarm panel or you can power it using the included 12-volt power adapter.

The Series 1000 Alarm Panel Valve Controller also has buttons on the front of the device to allow the user to control the valve manually. Leaving home and don