View larger

Prime Line D 1525 Sliding Glass Patio Door Roller Assembly, Marshall, 1-1/2 In.

Model: D 1525

Write a review

Item is normally in stock and ships out within 3-5 Business days (excluding transit time). If out of stock it can take up to 2-4 weeks (excluding transit time).Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.

Details: Prime Line D 1525 Sliding Glass Patio Door Roller Assembly, Marshall, 1-1/2 In.

This is a K-tab patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. The T-shaped tab (K-tab) is simply slid up into a T shaped receptacle in the bottom of the patio door. No screws are required. The housing is 3/4 in. wide with a dimple width of 7/8 in., 1-1/4 in. tall and 2-1/4 in. long. The dimples secure it within the door's bottom frame. Used by Marshall and a variety of other sliding door manufacturers.

Features

Used by Marshall and a variety of other patio door manufacturers
The T-shaped tab (K-Tab) is simply slid up into a T-shaped receptacle in the bottom of the patio door
1-1/2 in. diameter concave ball bearing roller
Stamped steel body and roller
Rear adjusting screw
Easy to install
A Phillips head screwdriver is required for Installation
For further dimensional information, please see the line drawing

Specifications

Roller Material: Steel - Ball Bearing
Housing Width: 3/4"
Roller Width: 5/16"
Roller Edge Type: Concave
Availability: N/A
Housing Length: 2-1/4"
Housing Height: 1-1/4"
Overall Housing Width: 7/8" at Dimples
No of Wheels in Roller Assembly: 1 Wheel
Mounting Tab Type: C-Tab

Applications

Public Buildings & Facilities
Commercial & Industrial Buildings
Government & Military Facilities
Retail & Strip Malls
Multifamily & Mixed-Use

Downloads

D 1525-INS.PDF

Prime Line Warranty