2. Facilities & Industrial Supply
  3. Commercial Door Hardware
  4. Exit Devices
  5. Rim
  6. 8866Gx PTBFSWx 10Bx LHR Rim Exit Device w/ Thumb Piece & Pull Trim
Reduced price! Sargent PTB 8800 Multi-Function Rim Exit Device View larger

Sargent

Previous Next

8866Gx PTBFSWx 10Bx LHR Rim Exit Device w/ Thumb Piece & Pull Trim

8866Gx PTBFSWx 10Bx LHR

Rail
43'' to 48"
edit options

Item normally ships out within 4-6 Weeks (excluding transit time). Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.

$2,109.26

40% Off

$3,515.43

?

Details: 8866Gx PTBFSWx 10Bx LHR Rim Exit Device w/ Thumb Piece & Pull Trim

Features

  • Designed for standard width stile applications on wood and metal doors
  • Also available as an HC8800 or WS8800 for hurricane-resistant applications, see Hurricane-Resistant section of the catalog
  • Single point rim latching device
  • Single door & double door applications with mullions
  • Quiet operation and solid security
  • ANSI/BHMA A156.3 - Grade 1
  • UL10C (Fire) and UL305 (Panic) Listed
  • Notes for Two-tone finishes - 2930 Finish: grip of lever is 32D, balance of lever is 32. Rose/escutcheon and lock finish will be 32, 3029 Finish: grip of lever is 32, balance of lever is 32D. Rose/escutcheon and lock finish will be 32D
  • Note - FSL, FSW, MSL and PSB pulls are used with 12- 8804 and 8804 only, they are
  • identical to FLL, FLW, MAL and PTB pulls except the cylinder hole is located 3/8" (9mm) lower.

Specifications

Door Type
Metal Doors
Door Thickness
1-3/4" (44mm) minimum thickness.
Stile
4-1/2" (114mm) minimum stile width
Rail sizes as determined by door width
E Rail for 24" to 32" door widths, No cutting required for 32" door, F Rail for 33" to 36" door widths, No cutting required for 36" door, J Rail for 37" to 42" door widths, No cutting required for 42" door, G Rail for 43" to 48" door widths, No cutting required for 48" door
Strike
649 Standard Black Nylon Coated
Dogging Feature
Hex key dogging standard on non fired rated devices; specify 16- for cylinder dogging (
Mounting Fasteners
Supplied standard with wood and machine screws
Latch Bolt
Stainless steel, 3/4" (19mm) throw
Device Centerline from Finished Floor
41" (1041 mm) for Standard Applications
Center Case Dimensions
8-3/8" (213mm) x 2-5/8" (67mm)
Projection
Pushbar Neutral - 3" (76 mm), Pushbar Depressed - 2-1/8" (54 mm)

Applications

  • Public Buildings & Facilities
  • Commercial & Industrial Buildings
  • Government & Military Facilities
  • Retail & Strip Malls
  • Multifamily & Mixed-Use

Downloads

Available Model Numbers and Combinations

Model/SKUAttributes
8810Ex PTBFLWx 32Dx RHR 24" to 32", Satin Stainless Steel,
8828Jx PTBSTSx 04x RHR Thumb Piece Always Operable, 37" to 42",
8863Ex PTBFLWx 32Dx RHR Key Locks/Unlocks Thumb Piece, 24" to 32", Satin Stainless Steel,
8866Jx PTBSTSx 04x RHR 37" to 42",
884Gx PTBPSBx 10BLx RHR 43'' to 48",
8863Gx PTBPSBx 04x LHR Key Locks/Unlocks Thumb Piece, 43'' to 48",
884Gx PTBMALx 32Dx LHR 43'' to 48", Satin Stainless Steel,
884Ex PTBFSLx 32x RHR 24" to 32", Polished Stainless Steel,
884Fx PTBFSLx WSPx LHR 33" to 36", White Suede Powder Coat,
884Jx PTBPSBx 10Bx RHR 37" to 42",
8866Jx PTBFSWx 03x RHR 37" to 42",
8828Jx PTBFLLx 10BEx RHR Thumb Piece Always Operable, 37" to 42",
8866Jx PTBFLWx 10BEx LHR 37" to 42",
8828Ex PTBFSWx 10x LHR Thumb Piece Always Operable, 24" to 32",
8810Ex PTBFLWx 32Dx LHR 24" to 32", Satin Stainless Steel,

View All Model Numbers and Options

Reviews

Write a review

8866Gx PTBFSWx 10Bx LHR Rim Exit Device w/ Thumb Piece & Pull Trim

8866Gx PTBFSWx 10Bx LHR Rim Exit Device w/ Thumb Piece & Pull Trim

More products from this category