View larger

Von Morris 2701 Standard/Passage Cremone Bolt Door

Model:

Write a review

Item is normally in stock and ships out within 3-5 Business days (excluding transit time). If out of stock it can take up to 2-4 weeks (excluding transit time).Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.

Details: Von Morris 2701 Standard/Passage Cremone Bolt Door

Von Morris Cremone Bolts feature forged solid brass case and guides with an internal mechanism of brass and stainless steel. The Cremone case is very narrow, less than 1.5", for use on narrow stiles of French doors and windows. Cremone case contains a cassette mechanism that can be handed simply by reversing the cassette. The Cremone can also be easily changed from lever operation (90° rotation) to knob operation (180°) simply by relocating the spindle. Shoot Bolts are attached to the Cremone mechanism with machine screws. These machine screws are covered with interchangeable Frogs. Various Frogs are available to allow you to suite the Cremone Bolt. Cremone Bolts can be used with any Von Morris Knob or Lever. For double sided application, any appropriate Von Morris trim can be used. Knobs, levers and trim must be ordered separately.

Features

Solid Forged Brass
Hand Polished
Perfect for French Doors and Windows
Bolts can be used with any Von Morris Knob or Lever.
Available in Dummy (Non-Functioning) Styles
Knobs, Levers and Trim Must be Ordered Separately

Guide and Frogs

End Guides have a flat spring operating on the front of the bolt to prevent rattling. The length of the Guide and placement of the spring conceals any scratches on the bolt caused by the spring. This End Guide design allows the bolts to be installed on the door and then cut to length at the job site. Two Frogs are attached to the ends of the Cremone case with #8 × 1.0" screws and hide the attachment of the Shoot Bolts. One Frog is attached to the end of each End Guide.

Specifications

Spindle Height: Standard spindle height is 42"
Standard Lengths: 7', 8' and 10' Other sizes by special order. Bolts can be cut to size at job site
Spindle: Cremones are supplied with a 2" special spindle for single sided operation
Strikes: Cremone Bolts are supplied with Mortise and Universal strikes. Angle strikes and Box strikes are available at an additional cost
Lever: 90° rotation
Knob: 180° rotation
Length from end of Frog to end of Frog: 7.965"
Width: 1.463"
Height to edge of case: 0.787"
Height to face of knob/lever boss: 1.024"
Knob Operation: 1.00"
Lever Operation: 0.75"

Downloads