View larger

Von Morris 60 Solid Extruded Brass Loose Pin, Mortise Cabinet Hinge

Model: 60

Write a review

Item is normally in stock and ships out within 3-5 Business days (excluding transit time). If out of stock it can take up to 2-4 weeks (excluding transit time).Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.

Details: Von Morris 60 Solid Extruded Brass Loose Pin, Mortise Cabinet Hinge

Description

All hinges are packed with solid brass type "A" tapping flathead screws of the appropriate size. See above chart.
Brass Cabinet Hinges are supplied with threaded Decorative Ball Finials. Other finials are available at additional cost.
All finials are threaded into the barrel of the hinge to prevent the pin from rising.
All finials are sized to match the diameter of the hinge barrels to which they are mounted.
60-3020 hinges use finials 60-FF-L or 60-UF-L. All others use either 60-FF or 60-UF.

Features

Classic Design with Ball Finial
Solid Forged Brass
Hand Polished
Plain Bearing
Cabinet Weight
Cabinet hinges may be enhanced with Urn or Flat Finials

Hinge Body

Hinge body is manufactured from CDA alloy 38500 brass. It is machined from an extruded bar, resulting in a hinge with high strength and precision tolerances.
The hinges are beveled at the barrel to provide a close fit when the hinge is both open and closed.

Finish

Hinges are individually hand polished assuring an even finish with no unpolished areas. Von Morris extruded hinges are available in over 30 standard finishes.

Pins

Pins are machined from 304 series Stainless Steel for high durability and resistance to rust. One end is rounded to facilitate re-assembly, while the other end is knurled to keep the pin from dropping through the hinge barrel during re-assembly. The pin is held in place by the threaded finials and can be easily removed by unthreading the finials and tapping the pin up from the bottom.

Fasteners

All hinges are provided with type "A" tapping screws. These are solid brass, flat head, counter sunk, undercut phillips head screws. All screws are lacquered to prevent tarnishing. Screws are bagged either four per bag or six per bag to facilitate sales of half pairs.

Packing

Each hinge is individually bagged with screws. Cabinet hinges are packed four pairs per box, 80 pairs per master carton.

Finials

Cabinet hinges come with threaded ball finials installed. Other finials are available, packed in sets of four.