2. Facilities & Industrial Supply
  3. Commercial Door Hardware
  4. Thresholds
  5. Pemko TYPE11 Center Hung Floor Closer Threshold Assembly w/o Mitered Ends
Pemko TYPE11 Center Hung Floor Closer Threshold Assembly w/o Mitered Ends View larger

Pemko

Pemko TYPE11 Center Hung Floor Closer Threshold Assembly w/o Mitered Ends

Order $500 worth of Pemko Products and get 30% OFF!

Item normally ships out within 2-4 Weeks (excluding transit time). Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.

$195.94

?
?

Details: Pemko TYPE11 Center Hung Floor Closer Threshold Assembly w/o Mitered Ends

Floor Closer Threshold/Cover Plate Assemblies

Floor Closer Covers are thresholds used to cover floor closers. They must be properly fabricated to allow for the proper operation of the floor closer. No merchandise made for special order will be accepted for return or credit. When ordering, please provide the following information.

  • TYPE OF ASSEMBLY: Type 11 or Type 14 for center hung, Type 13 or 15 for offset hung.
  • CLOSER TO BE USED: Manufacturer and model number.
  • NET LENGTH: Jamb-to-Jamb. Assembly Type 11, 13 and 14 are cut with center hung section 1/2" over net length up to 48" and 1" over net length over 48" to allow for fitting on the job. Please be specify "net length", if required. Assembly Type 15 is cut net length because of factory-cut miters.
  • HANDING: For single doors, specify right or left hand. For pairs of doors, handing is not required.
  • SPECIAL FINISHES: Examples include polished, oxidized and oil rubbed, Satin Buff, and PemKote.
  • SPECIAL FASTENERS: (For center section only) Example include: MS and ES, FHLS25 and SS/MS&ES.
  • SPECIAL FABRICATION INSTRUCTIONS - Notching, full miters, etc. Assembly Type 11 is supplied without mitered ends and assembly Type 13, 14 and 15 are supplied with both ends mitered. Also, when stop strips (shown on page 21), specify door thickness and pivot offset so that the threshold assembly width and pivot dimension can be determined.

Size for Threshold Table

TypeSizeThresholdMaterial
111/2 × 7176AAluminum
111/2 × 7176BBrass(Bronze)
111/2 × 7176DDark Bronze Anodized Aluminum
111/4 × 7276AAluminum
111/4 × 7276BBrass(Bronze)
111/4 × 7276DDark Bronze Anodized Aluminum
111/2 × 82548AAluminum
111/2 × 8254X4BBrass(Bronze)
111/2 × 82548DDark Bronze Anodized Aluminum
111/4 × 82748AAluminum
111/4 × 8274X4BBrass(Bronze)
111/4 × 82748DDark Bronze Anodized Aluminum
111/4 × 92749AAluminum
111/4 × 92749DDark Bronze Anodized Aluminum
111/4 × 102750AAluminum
111/4 × 102750DDark Bronze Anodized Aluminum
111/2 × 8-3/4193Ax2/195AAluminum
111/2 × 8-3/4193Bx2/195BBrass(Bronze)
111/2 × 8-3/4193Dx2/195DDark Bronze Anodized Aluminum
111/2 × 92549AAluminum
111/2 × 92549DDark Bronze Anodized Aluminum
111/2 × 102550AAluminum
111/2 × 102550DDark Bronze Anodized Aluminum

Ratings

  • Barrier-Free
  • Fire Rated - UL10C - Positive Pressure

Documentation

Catalog(PDF)

Available Model Numbers and Combinations

Model/SKUAttributes
TYPE 11-176A 36 1/2" x 7",
TYPE 11-176B 36 1/2" x 7",
TYPE 11-176D 36 1/2" x 7",
TYPE 11-176A 72 1/2" x 7",
TYPE 11-176B 72 1/2" x 7",
TYPE 11-176D 72 1/2" x 7",
TYPE 11-276A 36 1/4" x 7",
TYPE 11-276B 36 1/4" x 7",
TYPE 11-276D 36 1/4" x 7",
TYPE 11-276A 72 1/4" x 7",
TYPE 11-276B 72 1/4" x 7",
TYPE 11-276D 72 1/4" x 7",
TYPE 11-2548A 36 1/2" x 8",
TYPE 11-254X4B 36 1/2" x 8",
TYPE 11-2548D 36 1/2" x 8",

View All Model Numbers and Options

Reviews

Write a review

Pemko TYPE11 Center Hung Floor Closer Threshold Assembly w/o Mitered Ends

Pemko TYPE11 Center Hung Floor Closer Threshold Assembly w/o Mitered Ends

More products from this category