> >>>>Sargent 8600 Series Low Profile Center & Top Latch Concealed Vertical Rod Exit Device w/ ET Trim & Gramercy Lever
Reduced price! Sargent LP/LR/LS8600 Series Low Profile Exit Device w/ ET Trim And Gramercy, Wooster, Grant Park Lever View larger

Sargent

Previous Next

Sargent 8600 Series Low Profile Center & Top Latch Concealed Vertical Rod Exit Device w/ ET Trim & Gramercy Lever

Item normally ships out within 4-6 Weeks (excluding transit time). Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.

$3,132.60

40% Off

$5,221.00

?

Details: Sargent 8600 Series Low Profile Center & Top Latch Concealed Vertical Rod Exit Device w/ ET Trim & Gramercy Lever

Features

  • The security of a stainless steel center bolt, two concealed top bolts and a low profile device for pairs of doors without bottom rod issues
  • Devices are ANSI/BHMA A156.3 - Grade 2
  • UL10C (Fire) and UL305 (Panic) listed
  • 1-1/2" total projection from face of door
  • Center and top latching
  • No visible active chassis
  • Center latchbolt adjustable for up to 3/8" (9mm) door gap
  • Both doors are active. Either door can be opened or closed without affecting the other door. Open back strikes are not required
  • Top case latchbolt projection adjustable through top case
  • Tripping potential removed - no bottom strike
  • All functions determined by outside trim (ET Trim only)
  • Concealed rods for security and aesthetics
  • Notes for Two-tone finishes - 2930 Finish: grip of lever is 32D, balance of lever is 32. Rose/escutcheon and lock finish will be 32, 3029 Finish: grip of lever is 32, balance of lever is 32D. Rose/escutcheon and lock finish will be 32D

Specifications

Door Type
Factory prepped metal doors for LP & LR devices
Door Thickness
1-3/4" (44mm) doors only with 2-3/4" (70mm) backset
Stile
4-1/2" (114mm) minimum stile
Rail sizes as determined door width
L Rail for 36" door width no cutting required, M Rail for 42" to 44" door width no cutting required, N Rail - 46" to 48" door width no cutting required
Strike
650 Top Strike (Panic and Fire Rated) [LR & LP], 650 Top Strike & C7710 Mortise Strike (Panic and Fire Rated) [LS]
Dogging Feature
Hex key dogging standard on non fired rated devices; specify 16- for cylinder dogging (
Mounting Fasteners
Supplied standard with machine screws
Top & Center Bolts
Stainless steel
Device Centerline from Finished Floor
41" (1041mm) for Standard Applications
Door/Opening Height
Must be specified, 120" (3048mm) Max Door Opening
Center Case Dimensions
8-3/8" (213mm) × 2-5/8" (67mm)
Projection
Pushbar Neutral - 1-1/2" (38mm), Pushbar Depressed - 5/8" (15mm)

Applications

  • Public Buildings & Facilities
  • Commercial & Industrial Buildings
  • Government & Military Facilities
  • Retail & Strip Malls
  • Multifamily & Mixed-Use

Downloads

56- Latch Retraction in Power Mode

56- Latch Retraction in Timer Mode

Unboxing a 59- Electroguard Delayed Egress Exit Device

59- Electroguard Diagnostic LEDs

How to Change the Function on a SARGENT ET Lever Trim

Changing Spindles on Our ET Lever Trims

How to Change the Locking Slide on a SARGENT ET Lever Control

Reviews

Write a review

Sargent 8600 Series Low Profile Center & Top Latch Concealed Vertical Rod Exit Device w/ ET Trim & Gramercy Lever

Sargent 8600 Series Low Profile Center & Top Latch Concealed Vertical Rod Exit Device w/ ET Trim & Gramercy Lever

More products from this category