Reduced price!

View larger

SECO-LARM E Long-Range Barrier Sensors

Model: E-

Write a review

Item is normally in stock and ships out within 2-3 Business days (excluding transit time). If out of stock it can take up to 2-4 weeks (excluding transit time).Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.

Details: SECO-LARM E Long-Range Barrier Sensors

ENFORCER Long-Range Barrier Sensors are ideal for protecting indoor or outdoor areas separated by long distances. They feature reliable photobeam technology with a choice of four programmable beam frequencies that provide superior perimeter protection by eliminating crosstalk and interference when multiple units are used. False alarms caused by animals, falling leaves, poor weather, or other sources are minimized by programming the alarm output trigger operation.

Features

Weatherproof (IP65) for indoor or outdoor perimeter security
Long sensor range up to 190ft (60m) outdoors, 380ft (120m) indoors
Install on windows, doorways, skylights, fence tops, and any place where space is limited
End caps swivel so sensor can be mounted on a single wall or on opposite walls
Programmable immediate trigger on simultaneous breaking of beams, or trigger after a single pair of beams is broken for at least 2 seconds
Heater for use in cold weather operation
Heater activates at 41 degreeF (5 degreeC)
Terminal block wiring
Slim design: 2-1/4" × 1-7/8" (55 × 49 mm)
Rugged aluminum construction
Built-in tamper switches, one on either end, trigger the alarm if end cap is removed
No synchronizing wires required to align the beams
Form C relay output
LED and buzzer alignment indicators
AGC (Auto Gain Control) circuits regulate beam signals in order to compensate for and ensure operation in rain, fog, and low-temperature conditions
Programmable for 4 different frequencies to reduce interference between multiple units

Specifications

Number of Beams: 4 pairs
Sensing Range: Outdoor- 190' (60m), Indoor- 380' (120m)
Buzzer Active Current: 20mA:12VDC (RX)
Heater Active Current: 160mA:12VDC (Rx plus Tx)
Rx Standby Current: (Buzzer off) 80mA, heater off ( plus /-25 percent:12VDC)
Rx Trigger Current: (Buzzer on) 80mA, heater off ( plus /-25 percent:12VDC)
Tx Standby & Active Current: 84mA, heater off, ( plus /-25 percent:12VDC)
Input voltage: 12-24 VDC
Operating Voltage: 12-24VDC
Reaction time: 150/300/450/600 ms (DIP switch programmable)
LEDs - Red: Alignment LED (Rx only), ON - beam is broken / OFF - aligned
Detection System: Triggers as programmed when any 2 adjacent pair of beams are broken, or any single pair of beams is broken for over 2 sec. (programmable by JP2)
Alarm Output: NO/NC/COM, relay output, active for 1 sec. when triggered
Tamper Output: 1A:120VAC / 1A:24VDC (Tx & Rx)
Case material: Aluminum housing / PC anti-UV cover / ABS end caps
Operating Humidity: 0-95 percent
Operating Temperature: -49 degree-131 degree F (-45 degree-55 degree C)
Dimensions: 1-7/8" x 2-1/4" (49 x 55 mm) [Width x Height]
Alignment Angle: Horizontal plus /-90 degree
Weight: 7.7-lb (3.5kg) [with brackets]
Enclosure: Weatherproof IP65
Length: 43" (109cm)

Applications

Public Buildings & Facilities
Commercial & Industrial Buildings
Government & Military Facilities
Retail & Strip Malls
Multifamily & Mixed-Use

Downloads